Angelcare AC6115 Instruction manual
OWNER’S MANUAL
Model AC115
Baby Sound and Movement Monitor
Cord Safety
Ensure the Nursery Unit is at least 1 metre away from your baby’s cot.
The Sensor Pad cord must always be kept out of reach of baby and
secured using the cord cover kit provided.
For assistance, FAQs or guidance with your monitor
please visit our Customer Support page at angelcare.co.uk
TABLE OF CONTENTS
WARNINGS...............................................................................................................................................................................2
SETUP REQUIREMENTS .................................................................................................................................................................3
Charging the Parent Unit (10 hours) ..........................................................................................................................................4
Positioning the movement Sensor Pad .....................................................................................................................................5
Setting up the Nursery Unit ..........................................................................................................................................................8
Turning on your monitor ................................................................................................................................................................9
Testing and getting to know your monitor ............................................................................................................................. 11
Activating and deactivating additional functions ................................................................................................................17
Troubleshooting ..............................................................................................................................................................................18
Limited warranty ..............................................................................................................................................................................21
Technical specifications .................................................................................................................................................................21
OWNER’S MANUAL
KEEP YOUR OWNER’S MANUAL FOR FUTURE REFERENCE.
PLEASE READ THE WARNINGS AND INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING & USING THE PRODUCT.
FAILURE TO FOLLOW THE WARNINGS AND THE INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH OR DAMAGES
TO THE PRODUCT.
THE SENSOR PAD FEATURE IS NOT FOR USE WITH ADULTS, CHILDREN OR INFANTS OLDER THAN 24 MONTHS.
THE SENSOR PAD IS NOT INTENDED TO BE USED TO DETERMINE IF A CHILD IS OUT OF THE COT.
WARNING
Adult assembly required.
Keep small parts away from children when assembling.
We, at Angelcare®, stand behind all of our products.
If you are not completely satisfied or have any questions,
United States and Canada: Please contact us at: angelcare@cdecinc.ca
Other countries: Please contact your local distributor.
WARNINGS
1. THIS PRODUCT CANNOT REPLACE RESPONSIBLE ADULT SUPERVISION.
This prod uct is desi gned to aid i n the monito ring of your b aby. When
using the m onitor, you must still prov ide the supervisi on necessary for t he
continue d safety of yo ur baby. Mon itoring of pr emature b abies, o r those
conside red to be at risk, sho uld always be car ried out under t he supervisi on
of a health pr ofession al. This m onitor SH OULD NOT b e used as a me dical
device, no r as a device to pr event Sudd en Infant D eath Syndr ome (SIDS ).
2. WAR NING Strangula tion Hazard — Childr en have STRANGL ED in cords.
an electr ical outl et, DO NOT tou ch the expos ed end.
5. ALWAYS be sure tha t both the tra nsmitter a nd receive r are worki ng
properly a nd are within range of ea ch other. Test monitor before f irst use,
periodi cally an d when chan ging loc ation of the N urser y Unit.
6. ALWAYS be sure to im mediatel y check on b aby wheneve r an alarm
sounds.
7. DO N OT use monit or near wate r (such as bath tu b, sink, e tc.).
Keep adapt er cords out o f the reach
of childre n (more than 1 me ter away).
NEVER u se Wired Se nsor Pad (s)
without th e protective c ord covering .
Check prot ective cord coverin g before
each use. I mmediately d iscontinue us e
of Wired Se nsor Pad (s) if protective
covering is d amaged o r broken.
3. Neve r use exten sion cords w ith AC
adapters . ONLY use the AC ad apters
provid ed.
4. Wh en an AC Adapter is plu gged into
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
DO NOT EXPOSE TO RAIN OR MOISTURE
8. Kee p monitor AWAY from heat sources (suc h as stoves, radiators , etc.).
9. ALWAYS place both t he Nurse ry Unit an d Parent U nit on a flat s urface
in an uprig ht positio n and allow fo r proper ve ntilation . DO NOT pla ce on
sofas, cu shions , beds, etc . which may b lock venti lation.
10. Th is monitor u ses publi c airwaves to t ransmit si gnals. T he Parent U nit
may pick up sig nals or in terfere nce from oth er nurse ry monito rs in your
area. Your mo nitor may even be picked u p by other househo lds. To protect
your priva cy, make sure bo th units are t urned OF F when not in u se. If you
experien ce interf erence, c hange th e channe l on both unit s.
11. Th is produ ct is NOT a toy. DO NOT al low childr en to play with it .
12. T his produ ct conta ins small p arts. Ad ult asse mbly requ ired. Exe rcise
care when unpacking and assembling the product and keep small parts
away from chil dren.
13. Us e and store th e monitor a t a tempera ture betwe en 10 °C an d 40 °C.
BATTERY WARNING
14. U se ONLY AAA RECHA RGEABLE ba tteries for the Pa rent Unit. DO NOT
mix old and n ew batteries. DO N OT mix alkaline, stan dard or recharge able
batterie s. Inser t batter ies with corr ect pola rity. DO NOT sh ort-circu it
supply ter minals . ONLY use the rec ommend ed batter ies or equ ivalent
(volts and size) and the correct adapter. Remove batteries when product
is stored fo r long periods of tim e or when batteri es are exhausted. D ispose
exhauste d batteries pro perly. DO NOT rech arge non-re chargeabl e batteries.
Recharg eable bat teries ar e ONLY to be charg ed under a dult supe rvisio n.
Keep all bat teries away f rom child ren.
2
15. IMPORTANT SAFETY INSTRUCTIONS
15.1 R ead these i nstruct ions - All th e safety in structi ons shou ld be read
before the p roduct i s operated .
15.2 Keep these instr uctions. The sa fety and operatin g instructions s hould
be retaine d for futu re referen ce.
15.3 Heed all warnin gs – All warnings on the p roduct a nd in the ope rating
instruc tions sho uld be adh ered to.
15.4 Follow all instruc tions – Al l operatin g and use in structi ons shou ld
be followed.
15.5 Water and moisture - D O NOT use this a pparatu s near water. Fo r
example, n ear a bath tu b, wash bowl , kitchen si nk, lau ndry tub , in a wet
environm ent or nea r a swimming p ool and th e like. Ca re should b e taken
so that obje cts DO NOT fall onto u nits and th at liquids are not spil led into
either un it or Senso r Pad throu gh its ope nings.
15.6 Cleaning - Disco nnect al l units bef ore clean ing. DO NOT i mmerse i n
water any par t of the Nursery Uni t, Parent U nit. Clea n only with dry cloth.
15.7 Ventilation - DO NOT bloc k any ventilation op enings. Allow fo r proper
ventilatio n when units are in us e. DO NOT cover the Nurs ery Unit or Paren t
Unit with any o bject such as a bl anket. DO NOT pla ce it in a drawer or in any
location w hich would muf fle the sound o r interfere wi th the normal fl ow of air.
15.8 Heat sources - DO N OT install near any h eat sources such a s radiators,
heat regis ters, stove s, TVs or oth er appar atus (incl uding am plifier s) that
produce h eat. Heat c an dama ge the case o r electr ical par ts.
15.9 Power cord protectio n - Protect th e Sensor P ad cord and Ad apter’s
power cord fr om being wa lked on or pi nched by fu rniture or o ther items
– Power supp ly cords sho uld be route d so that they a re not likely t o be
walked on or p inched by it ems upon o r against t hem, payi ng partic ular
attentio n to cords and plugs, c onvenience recept acle, and the poi nt where
they exit from t he produc t.
15.10 Accessories - Only use attachments/accessories specified by the
manufa cturer. DO NOT p lace this p roduct on a n unstab le cart , stand,
tripod, b racket or ta ble. The p roduct m ay fall, ca using se rious inj ury to
a child or ad ult and ser ious dam age to the pro duct. Us e ONLY with a
cart, stand, tripod, bracket or table recommended by the manufacturer
or sold with th e produc t. Any moun ting of the pr oduct sh ould foll ow the
manufacturer’s instructions.
15.11 Unplug this appl iance dur ing lightn ing storm s or when not u sed for
long peri ods of time .
15.12 Servicing - DO NOT a ttempt to serv ice this produc t yourself as o pening
or removin g covers (except bat tery doo rs) may expose you to d angero us
voltage or o ther haza rds.
15.13 Replacement pa rts - Whe n replace ment par ts are req uired, be s ure
the replacement parts specified by the manufacturer have the same
charact eristic as t he origin al part. U nautho rized subst itution may re sult
in fire, el ectric sh ock or othe r hazards .
15.14 Usage - This baby mon itor is intended as a n aid. It is NOT a subst itute
for respon sible and prop er adult supe rvision and s hould not be use d as such.
Use this ap pliance O NLY for its inten ded use as d escribe d in this man ual.
15.15 Power Sou rces - Ope rate this pro duct onl y from the ty pe of power
source ind icated on the ty pe plate of the ada ptor.
of power sup ply to your home, co nsult your deal er or local powe r company.
15.16 Overloading - DO N OT overload wa ll outlet s, extens ion cords o r
integral co nvenienc e recepta cles as this c an result i n a risk of fire o r
electric shock.
15.17 O bject a nd Liquid E ntry - NE VER push ob jects of a ny kind into th is
product t hrough casing slot s as they may touch dange rous voltage point s
or short o ut parts that cou ld result in a risk of fi re or electric sho ck. NEVER
spill liqu id of any kind o n the produ ct.
15.18 Antenna - The anten na used fo r this trans mitter mu st be inst alled
to provide a se paration d istance o f at least 20 c m from all pe rsons an d
must not be c ollocated or ope rating in conjunc tion with any other ante nna
or tr ans mit ter.
If you are uns ure of the type
15.19 Power Lines - An outs ide anten na system sh ould NOT be l ocated
in the vicin ity of overhe ad power lin es or other e lectri c light or powe r
circuit, o r where it ca n fall into su ch power lin es or circu its as cont act
with them may b e fatal.
15.20 WARNING Stran gulatio n Hazard — Ch ildren have S TRANG LED in
cords. Kee p adapter cords out of th e reach of children (mo re than 1 meter
away). NEVER u se Senso r Pad(s) without th e protecti ve cord coveri ng.
Check prot ective cord covering be fore each use. Imme diately discontinu e
use of Sens or Pad(s) if protec tive coverin g is damage d or broken .
15.21 Interferen ce - This mon itor uses pu blic air waves to transm it signals.
The Paren t Unit may pic k up signal s or interf erence fro m other nu rsery
monitors i n your area . Your monitor m ay even be picke d up by other
househo lds. To protec t your priva cy, make sure bot h units are tu rned
OFF when n ot in use. If yo u experie nce interf erence, c hange th e channe l
on both unit s.
15.22 Vibration So urce - When t he monitor i s in use, DO N OT use
a bedside c rib, cot mob ile or othe r cot accesso ries that m ay produce
vibratio ns. Othe r sources of v ibration s may inclu de fans, w ashing
machine s, loud mu sic, etc . These sou rces of vibra tion may inte rfere
with the per forman ce of your Ang elcare® monitor an d the alarm w ill not
sound if it co ntinues to d etect any m ovement oth er than you r baby’s.
Be sure all vi bration so urces are e liminate d before usi ng the moni tor.
15.23 You may experience f alse ala rms for sever al reason s. The
most comm on reason i s the Nurse ry Unit h as not bee n turned O FF
after you ha ve removed you r baby from th e cot. Anoth er reason i s
the Senso r Pad has not b een plac ed under th e mattres s properl y.
Be sure the S ensor Pad is on a fla t, firm surfac e with the printed sid e facing
up. The sen sitivity l evel may also n eed to be adj usted. Re fer to Step 5 .4.
Always be sure to i mmediately check o n baby whenever an ala rm sounds .
15.24 Sensor Pad - If th e cot has a spring or slat ba se, place a hard board
between th e cot base an d the Sens or Pad mea suring at le ast 33 x 33 c m
and 6 mm thic k. Only use your An gelcare® monitor in a s tationary sle eping
environm ent such as a cot where the S ensor Pad can rest o n a completely
flat, fir m surfac e. The Sen sor Pad is ma de of plas tic and doe s not permi t
the air to circ ulate. The refore, mi ldew buil d up could deve lop unde rneath
the mattre ss in the Se nsor Pad ar ea. We sugge st rotatin g the mattre ss
regular ly to prevent any m ildew.
16. IMPORTANT SAFETY INSTRUCTIONS RELATED TO USE OF BATTERIES
16.1 U se ONLY the type and s ize of batteries s pecified in th e owner’s manu al.
There is a ris k of explosion if batte ries are replace d with an incorrect t ype.
16.2 Use ONLY AAA rech argeabl e batteri es and/or the AC Ad apters
provided fo r the Paren t Unit. You mus t use only re chargea ble batte ries
in the Paren t Unit. DO N OT use alkal ine batte ries or you wi ll severely
damage th e unit.
16.3 Charge the batte ries for 10 hour s prior to first use . Be sure to have the
monitor in th e OFF position dur ing this period. O NLY use the AC Adapters
included with your monitor.
16.4 DO NOT use t hese adap ters with any ot her equi pment.
16.5 When unplugg ing the AC Adap ter from the N urser y Unit, be su re it
is switched to t he OFF pos ition. If it i sn’t, th e unit will reve rt to batte ry
mode if bat teries are i nstall ed.
16.6 DO NOT use recharge able bat teries in th e Nurser y Unit. Use alkalin e
ba tt er ies O NLY.
16.7 DO NOT dispose batte ries in fire. They m ay explode. Check wi th local
regulati ons for pos sible spe cial disp osal ins tructio ns.
16.8 Exercise care in h andling batt eries in order n ot to short out th e batteries
with condu cting material s such as rings, b racelets and keys . Overchargin g,
short ci rcuiting , reverse cha rging, m utilation , or incin eration of b atterie s
must be avoid ed to prevent o ne or more of t he followi ng occurre nces:
release of tox ic materia ls, relea se of hydroge n and/or oxyge n gas and
rise in sur face temp erature.
16.9 DO NOT attempt to rech arge batteries p rovided with or ident ified for
use with this p roduct th at are not in tended to be c harged . The batte ries
may leak cor rosive elec trolyte o r explode .
16.10 DO NOT attempt to reju venate the batte ries provided w ith or identif ied
for use with th is produc t by heating t hem. Sud den rele ase of batte ry
electro lyte may occu r, causing b urns or irr itation to eye s or skin.
16.11 If and when necessary, the batteries must be replaced with identical new
ones or equivalent (volts and size). If a battery to be replaced is connected
with other batteries in series, replace the other batteries at the same time
as well. DO NOT mix old and new batteries.
16.12 Reverse polarit y installation of th e batteries in the e nd product must
be avoided . Reverse ins ertion o f batterie s can cau se chargi ng, and tha t
may result in l eakage o r explosio n.
16.13 Remove batteries f rom this product if yo u store the product ove r 30
days because the batteries could leak and damage the product.
16.14 Discard ‘dead’ b atterie s as soon as po ssible si nce ‘dead ’ batteri es
are more like ly to leak in a p roduct . If a batter y has leake d or vented , it
should be r eplaced i mmedia tely using p rotective gl oves.
16.15 DO NOT store this prod uct, or the bat teries provide d with or identifi ed
for use with th is produc t, in high -temper ature area s.
E
N
SETUP REQUIREMENTS
INCLUDED:
Parent Unit Nursery Unit Tabletop stand
AC adapter
(for Parent Unit)
Wired Movement Sensor Pad
* Always place Angelcare® logo
side up *
(for Nursery Unit)
2 Rechargeable AAA Batteries
Model AC115
Sound and Movement Monitor
6 Pre-threaded cord
covers with Split USB
cable
2X
AC adapter
(for Parent Unit)
(for Nursery Unit)
3
YOU MUST PREPARE:
WHAT YOU WILL NEED (NOT INCLUDED):
One hardboard (not included)
Thickness: 6 mm
Minimum dimensions:
33 x 33 cm
Maximum dimensions:
equal to the mattress size
IMPORTANT
The hardboard must be larger than
Hardboard
2X
2 AAA Alkaline
Batteries
(for Nursery Unit)
the Sensor Pad surface.
STEP 1 - CHARGING THE PARENT UNIT (10 HOURS)
1) Remove the battery
compartment on the
rear. Insert the provided
Battery
compartment
1
2
10
3
rechargeable batteries into
the compartment.
2) Connect the USB plug to
the Parent Unit.
3) Connect the power
adapter to an electrical
outlet.
4) Charge the unit for
10 continuous hours prior
to first use.
Miniature Philips
Screwdriver
PARENT UNIT:
Menu/
Exit Menu
Confirm Selection/
Pause Sensor Pad
4
Power
On/Off
OK
TIC Indicator
Talk Back
Button
UP/
Volume +
Down/
Volume -
Rechargeable
battery
compartment
Micro USB
charging port
WARNING
STRANGULATION HAZARD.
Children have STRANGLED in cords:
• Keep adapter cords out of the reach of children
(more than 1 meter away).
• Because of the serious strangulation risk to infants
and toddlers, parents and caregivers should never
place the Nursery Unit within 1 meter of a cot.
• NEVER use Sensor Pad without the cord covers.
Check cord covers before each use to ensure it is
securely placed under the leg of the cot. Discontinue
use of Sensor Pad if any cord covers are damaged or
broken.
• NEVER use extension cords with adapters. ONLY
use the adapters provided. This product is not a toy.
Never allow children to play with it.
STEP 2 - POSITIONING THE MOVEMENT SENSOR PAD
2.1 - SELECT A LOCATION FOR THE NURSERY UNIT
E
N
IMPORTANT
Place the cot near a supporting wall and far from air currents. Install the Nursery Unit on
a flat, stable surface facing the cot at a distance of at least 1 meter. Make sure to plug
the adapter to the socket outlet nearest to the equipment and that is easily accessible.
Place the Nursery
Unit at least
1 meter
from the cot
5
1) Insert jack 1 into the Sensor Pad and twist it clockwise to lock it.
6 5 4 3 2 1
2.2 - SELECT THE COT LEG TO SECURE THE CORD COVERS
RECOMMENDED
6
5
4
3
Figure 1 Figure 2
2
OR
2
1
1
6
5
4
3
Use the cot leg by the wall closest to the Nursery Unit (Figure 1). In cases where the
Nursery Unit is across the room, use the leg closest to the Nursery Unit to position the
covered wire (Figure 2). It is always preferable that the covered cord run along a wall.
2.3 - INSTALL THE SENSOR PAD ON THE MATTRESS SUPPORT
IMPORTANT
If your cot does not have a solid, stable surface for the Sensor
Pad, you will need to place a support under it, to ensure correct
operation of the system.
This hardboard support should be at least 6 mm thick and should
have minimum dimensions of 33 x 33 cm. This support board must
Hardboard
be larger than the Sensor Pad surface area.
The Sensor Pad functions with any size and type of mattress except memory-foam
mattresses, hollow frame mattresses and water beds. The hardboard maintains a
constant pressure on the Sensor Pad, enabling it to detect baby’s movements even
when baby is at the edge of the cot.
6
2
4132
4
3
2
1
Sensor Pad
4
8 cm
3
5
6
4
3
2
1
1) Remove the mattress
from the cot.
2) Place the Sensor Pad –
Angelcare
– on top of the
®
logo side up
hardboard.
3) Run the connection pin,
E
N
warning label and the first
5 cord covers down along
the rear of the cot leg,
between the mattress
support and the inside
edge of the cot.
4) Bring the first 4 cord
5
covers down the floor,
and keep the 5th cord
cover vertically, along
the rear of the cot leg,
between the mattress
and the inside edge of
the cot.
5) Remove any cord slack
to make sure no parts
of the cord are loose.
6) Place the 6th cord
cover approximately
8 cm from the edge of
the mattress support.
7
8 9
CLICK!
7) Snap together the
remaining cord covers
that will run along the
floor.
8) Remove any cord slack
to make sure no parts
of the cord are loose.
9) Peel off the doublesided tape on the 4
cord cover and place
th
it securely under the
cot leg.
7
WARNING
STRANGULATION HAZARD
• Remove all slack from Sensor Pad Cord.
• When lowering the mattress support
as your baby grows, slide the vertical
Cord Cover downward so it remains
approximately in the center between
the mattress support and the floor. Slide
the Sensor Pad Cord through the Floor
Cover to eliminate any additional slack.
• The Sensor Pad is not designed
for use with adults, children or infants
older than 24 months.
• Discontinue use of the Sensor Pad
when baby is older than 24 months.
Deactivate the Movement Function and
remove the Sensor Pad from cot and
store for future use.
• BEFORE FIRST TIME USE: To test
that the unit is ready for use, refer to
instruction manual on how to test that
the installation has been done correctly.
STEP 3 - SETTING UP THE NURSERY UNIT
Select a location for the Nursery Unit that is at least 1 meter away from the cot.
1) Remove the batteries cover and
insert 2 AAA Alkaline Batteries
1
(not included)
Note:
The batteries are a back up
power supply in case of power
outage.
Sensor Pad
5
8
6
5
2
MUST BE AT LEAST
1 METER DISTANCE
4 3 2 1
2) Install the Nursery Unit on a flat,
stable surface facing the cot at
a distance of at least 1 meter
and plug the Sensor Pad cord
into the Nursery Unit.
3) Check to make sure the Sensor
Pad has not moved from its
position.
4) Place the mattress back inside
the cot.
5) Connect the USB plug to the
Nursery Unit and the USB plug
with the power adapter and
then to an electrical outlet.
Loading...