Anchor FRAME TENTS 10X10, FRAME TENTS 15X15, FRAME TENTS 5M, FRAME TENTS 20X20 Assembly Instructions

Assembly Instructions

Century Frame Tent

10’ x 10’, 15’ x 15’, 20’ x 20’ & 5M x 5M

Tents with optional walls

Please read all assembly / installation instructions before the installation or removal of this product.

SALES OFFICES:
1100 BURCH DRIVE
PO BOX 3477
EVANSVILLE, IN 47733 USA

EC 4585

PHONE: [phone]

FAX: [phone]

1-800-544-4445

EMAIL: [e-mail]

www.anchorinc.com

Quality, Craftsmanship and Service since 1892

PRODUCTION FACILITY:

EVANSVILLE, IN

CF 0812

CENTURY FRAME TENT SYSTEM

PARTS LIST

MANPOWER REQUIRED

Two experienced installers should be able to
assemble tent in less than thirty minutes.

PARTS

10’ x 10’ 15’ x 15’ 5M x 5M 20’ x 20’

BAG WITH TOP 1111

TENSION STRAPS 4444

UPRIGHT 4444

EAVE, 10’ FEMALE 4 - - 4

EAVE, 10’ MALE - - - 4

EAVE, 15’ FEMALE - 4 - -

EAVE, 5M FEMALE - - 4 -

ADJ. CENTER POLE 1111

BASE PLATE 4444

CORNER WELDMENT 4444

30” STEEL STAKE 8888

CABLE 2222

WEB GUY 4444

WALLS, 2PC. OPTIONAL 4444

TENT SIZE

IDENTIFY AND LAY OUT PARTS FOR ASSEMBLY
(20’ x 20’ SHOWN THROUGHOUT)

TOOLS REQUIRED

Sledge Hammer
4’ Step Ladder
(2) 9/16” Wrenches

INSPECT SITE-CAUTION:

Consult your local utility locator service or
the National Utility Locating Contractors
Association (NULCA) prior to installation.
Prior to actual tent assembly, be sure to look
up, down, above & below for obstacles, pipes,
wires, trouble, etc.

LAYOUT & CHECK

Utilize parts list for a quick I.D. and a check

list to ensure that you have all the parts.

UPRIGHTS

STAKES

BASE PLATES

WEB GUYS AND

*10’, 15’ AND 5M SIZE TENTS HAVE 1 PIECE
EAVE, FEMALE.

2

TENSION STRAPS

RATCHETS

ASSEMBLE EAVES

1

Mate 2 piece eaves if applicable. Join ends of eaves
with corner weldments.

Wall Hangs in Bottom
Outside Channel.

Century Frame Extrusion

ASSEMBLE EAVES

ATTACH CABLES

INSTALL TOP

INSTALL TOP

3