Amx FG1061-16-EK-FX Datasheet
DATA SHEET
Enova® DGX 1600 Enclosure
DGX1600-ENC (FG1061-16)
Overview
The new Enova DGX 1600 Enclosure (DGX1600-ENC) is a Digital Media Switcher that
is ready to support 4K and Ultra High Definition (UHD) content. This robust solution
includes a NetLinx® NX Integrated Controller, redundant power supplies and can be
populated with Enova DGX video input and output boards in addition to optional
audio-switching boards. There are four connections per video board, and each
enclosure holds four video input boards and four video output boards for a
maximum matrix of 16x16.
© 2015 AMX. All rights reserved.
The Enova DGX 1600 adds several new capabilities such as automatic setup of
DXLink endpoints, single IP addressing for multiple endpoints, and a new web
interface to greatly simplify installation and configuration. The new advanced
Audio Switching Boards add audio breakaway capabilities and parametric EQ on
each DGX output.
The Enova DGX 1600 is far beyond a modular media switcher with built-in controller – it functions as the
centerpiece of a complete integrated solution that manages and distributes analog and digital audio and video
including HDMI/HDCP, control and Ethernet. Easily integrate HDCP into system designs and enjoy hassle-free plugand-play operation. No tools, no delays and no key constraints – it just works with AMX's exclusive InstaGate Pro®
Technology. Built for today's and tomorrow's needs, a comprehensive set of Enova DGX boards can be used in
conjunction with DXLink and DGX Transmitters and Receivers to provide an end-to-end distribution system over
twisted pair cable or fiber. An integrated NetLinx NX Controller and embedded Ethernet switch enables
management of the entire solution including source equipment and display devices located throughout the
environment – all from a single point of control.
2
In addition to eliminating HDCP delays, InstaGate Pro allows traditionally key limited sources to be switched freely
to all connected HDCP compliant displays – eliminating HDCP key limitations that plague large applications. Builtin SmartScale® Technology on every output provides video that is perfectly scaled for each connected display,
eliminating the integration challenges that can occur when sources and displays have different supported
resolutions – making it easy to specify, easy to install and easy to use. With the powerful combination of analogto-digital signal conversion, video scaling and high speed digital switching the system delivers perfect video every
time – regardless of signal type.
As part of a complete distribution system, easily send analog or digital audio and video including HDMI with HDCP
signals, plus control, 10 Km over single mode fiber or 300 meters over multimode fiber; send all this plus power
up to 100 meters over standard twisted pair cable, to and from the Enova DGX using the DXLink Twisted Pair and
Fiber Transmitters/Receivers.
Common Applications
Enova DGX is ideal for dramatically simplifying AV control and distribution in large spaces such as lecture
halls, auditoriums, hotel ballrooms, casinos, museums and stadiums/arenas.
The Enova DGX is ideally suited for multi-room or configurable room applications, where multiple
collaboration spaces share a single DGX for control.
Enova DGX fiber capabilities enable transport of audio, video and control up to 10 Km making it a perfect
solution for tall buildings with multiple floors, large campuses with multiple buildings or large facilities such
as a factory.
Enova DGX fiber solutions provide secure distribution of content for applications which data security is
critical such as government, banking/finance or network operation centers.
Features
HDMI/HDCP Switching – End-to-end distribution of HDMI/HDCP without interruption or key constraints
using InstaGate Pro® Technology
4K and Ultra High Definition (UHD) Content Ready – Designed to support future resolutions for years to
come
HDCP Compliance Over Fiber – Compatible DXLink Fiber boards transmit uncompressed video, including
HDCP protected content, up to 10 Km at 10 Gbps (single mode fiber options transmit 10 Km, multimode 300
m)
Fiber Your Way – DXLink Fiber boards are available in single mode or multimode; simplex or duplex
AV and Control over Twisted Pair, Fiber or Both – Send audio, video, bi-directional control and Ethernet over
twisted pair or fiber cable, or integrate both into the same system
Embedded NetLinx NX Integrated Control Processor – Allows any connected device to be managed,
monitored or controlled
Integrated Ethernet Switch – Pass Ethernet through the attached DXLink Twisted Pair or Fiber Transmitters
and Receivers
Analog to Digital Video Conversion with Scaled Outputs – Converts any source signal to digital and uses
SmartScale Technology to automatically output video that is perfectly scaled for each connected display
Onboard Web Configuration for all Aspects of the DGX System – Greatly simplifies the setup and
configuration of Enova DGX systems including DXLink endpoints drastically reducing installation time
Automatic Setup of DXLink Endpoints – Simplified installation by auto-discovering DXLink devices when they
are connected to an Enova DGX
Single IP Address Required for Multiple Endpoints – Reduces the need for IT administrators to provision
numerous IP addresses across the system for transmitters and receivers
Unrivaled Network Security: Dual NIC – The LAN port is used to connect the master to an external network,
and the ICSLAN ports connect to AMX or third-party AV equipment isolated from the primary network,
providing rock-solid security
Independent Routing of Audio and Video Using Audio Switching Boards – Provides increased flexibility to
combine and separate audio from video in a variety of applications
AxLink Port – Makes it easier to connect AxLink devices like keypads directly to the Enova DGX
InstaGate Pro Technology – Easily integrate HDCP into system designs and enjoy hassle-free matrix switching
to all compliant displays. No tools, no delays, and no key constraints – it just works
Loading...