AMX DGX3200-ENC Datasheet
DATA SHEET
Enova
DGX3200-ENC (FG1061-32)
®
DGX 3200 Enclosure
Overview
The new Enova DGX 3200 Enclosure (DGX3200-ENC) is a Digital Media Switcher that
is ready to support 4K and Ultra High Definition (UHD) content. This robust solution
includes a NetLinx® NX Integrated Controller, redundant power supplies and can be
populated with Enova DGX video input and output boards in addition to optional
audio -switching boards. There are four connections per video board, and each
enclosure holds eight video input boards and eight video output boards for a
maximum matrix of 32x32.
The Enova DGX 3200 adds several new capabilities such as automatic setup of
DXLink endpoints, single IP addressing for multiple endpoints, and a new web
interface to greatly simplify installation and configuration. The new advanced
Audio Switching Boards add audio breakaway capabilities and parametric EQ on
each DGX output.
The Enova DGX 3200 is far beyond a modular media switcher with built-in controller – it functions as the
centerpiece of a complete integrated solution that manages and distributes analog and digital audio and video
including HDMI/HDCP, control and Ethernet. Easily integrate HDCP into system designs and enjoy hassle-free plugand-play operation. No tools, no delays and no key constraints – it just works with AMX's exclusive InstaGate Pro®
Technology. Built for today's and tomorrow's needs, a comprehensive set of Enova DGX boards can be used in
conjunction with DXLink and DGX Transmitters and Receivers to provide an end-to-end distribution system over
twisted pair cable or fiber. An integrated NetLinx NX Controller and embedded Ethernet switch enables
management of the entire solution including source equipment and display devices located throughout the
environment – all from a single point of control.
© 2016 AMX. All rights reserved.
DGX-3200-ENC | 2
In addition to eliminating HDCP delays, InstaGate Pro allows traditionally key limited sources to be switched freely
to all connected HDCP compliant displays – eliminating HDCP key limitations that plague large applications. Builtin SmartScale® Technology on every output provides video that is perfectly scaled for each connected display,
eliminating the integration challenges that can occur when sources and displays have different supported
resolutions – making it easy to specify, easy to install and easy to use. With the powerful combination of analogto-digital signal conversion, video scaling and high speed digital switching the system delivers perfect video every
time – regardless of signal type.
As part of a complete distribution system, easily send analog or digital audio and video including HDMI with HDCP
signals, plus control 10 Km over single mode fiber or 300 meters over multimode fiber; send all this plus power up
to 100 meters over standard twisted pair cable to and from the Enova DGX using the DXLink Twisted Pair and
Fiber Transmitters/Receivers.
Common Applications
The Enova DGX is ideal for dramatically simplifying AV control and distribution in large spaces such as lecture
halls, auditoriums, hotel ballrooms, casinos, museums and stadiums/arenas.
The Enova DGX is ideally suited for multi-room or configurable room applications, where multiple
collaboration spaces share a single DGX for control.
Enova DGX fiber capabilities enable transport of audio, video and control up to 10 Km making it a perfect
solution for tall buildings with multiple floors, large campuses with multiple buildings or large facilities such
as a factory.
Enova DGX fiber solutions provide secure distribution of content for applications which data security is
critical such as government, banking/finance or network operation centers.
Features
HDMI/HDCP Switching – End-to-end distribution of HDMI/HDCP without interruption or key constraints
using InstaGate Pro® Technology
4K and Ultra High Definition (UHD) Content Ready – Designed to support future resolutions for years to
come
HDCP Compliance Over Fiber – Compatible DXLink Fiber boards transmit uncompressed video, including
HDCP protected content, up to 10 Km at 10 Gbps (single mode fiber options transmit 10 Km, multimode 300
m)
Fiber Your Way – DXLink Fiber boards are available in single mode or multimode; simplex or duplex
AV and Control over Twisted Pair, Fiber or Both – Send audio, video, bi-directional control and Ethernet over
twisted pair or fiber cable, or integrate both into the same system
Embedded NetLinx NX Integrated Control Processor – Allows any connected device to be managed,
monitored or controlled
Integrated Ethernet Switch – Pass Ethernet through the attached DXLink Twisted Pair or Fiber Transmitters
and Receivers
Analog to Digital Video Conversion with Scaled Outputs – Converts any source signal to digital and uses
SmartScale Technology to automatically output video that is perfectly scaled for each connected display
Onboard Web Configuration for all Aspects of the DGX System – Greatly simplifies the setup and
configuration of Enova DGX systems including DXLink endpoints drastically reducing installation time
Automatic Setup of DXLink Endpoints – Simplified installation by auto-discovering DXLink devices when they
are connected to an Enova DGX
Single IP Address Required for Multiple Endpoints – Reduces the need for IT administrators to provision
numerous IP addresses across the system for transmitters and receivers
Unrivaled Network Security - With Dual NIC to isolate AMX or third-party AV equipment from the primary
network, IPv6 and wired 802.1X for protected network access, and user-defined LDAP login group support,
the Enova DGX provides rock-solid security
Independent Routing of Audio and Video Using Audio Switching Boards – Provides increased flexibility to
combine and separate audio from video in a variety of applications
AxLink Port – Makes it easier to connect AxLink devices like keypads directly to the Enova DGX
InstaGate Pro Technology – Easily integrate HDCP into system designs and enjoy hassle-free matrix switching
to all compliant displays. No tools, no delays, and no key constraints – it just works
SmartScale Technology – Automatically responds to the display's declared EDID information and scales the
video to the best resolution and video parameters for that display without manual setup; this prevents
DGX-3200-ENC | 3
inferior video quality when sources are forced to lower resolutions to support the least capable display in the
GENERAL
Supported Signal Styles/
Compatible Input and Output Boards
• DGX-I-HDMI, Enova DGX HDMI Input Board (FG1058-
540)
• DGX-O-HDMI, Enova DGX HDMI Output Board
(FG1058-550)
• DGX-I-DVI, Enova DGX DVI Input Board (FG1058-600)
• DGX-O-DVI, Enova DGX DVI Output Board (FG1058-
610)
• DGX-I-DXL, Enova DGX DXLink Twisted Pair Input
Board (FG1058-570)
• DGX-O-DXL, Enova DGX DXLink Twisted Pair Output
Board (FG1058-580)
• DGX-I-DXF-MMD, Enova DGX DXLink Multimode
Fiber Input Board, Duplex (FG1058-622)
• DGX-O-DXF-MMD, Enova DGX DXLink Multimode
Fiber Output Board, Duplex (FG1058-632)
• DGX-I-DXF-MMS, Enova DGX DXLink Multimode
Fiber Input Board, Simplex (FG1058-623)
• DGX-O-DXF-MMS, Enova DGX DXLink Multimode
Fiber Output Board, Simplex (FG1058-633)
• DGX-I-DXF-SMD, Enova DGX DXLink Single Mode
Fiber Input Board, Duplex (FG1058-620)
• DGX-O-DXF-SMD, Enova DGX DXLink Single Mode
Fiber Output Board, Duplex (FG1058-630)
• DGX-I-DXF-SMS, Enova DGX DXLink Single Mode
Fiber Input Board, Simplex (FG1058-621)
• DGX-O-DXF-SMS, Enova DGX DXLink Single Mode
Fiber Output Board, Simplex (FG1058-631)
• DGX-AIE, Enova DGX Audio Insert / Extract Board for
Enova DGX 8/16/32/64 (FG1058-705)
• DGX3200-ASB, Enova DGX Audio Switching Board for
Enova DGX 3200 (FG1061-732)
• DGX-I-HDMI-4K, Enova DGX 4K HDMI Input Board
(FG1061-540)
system
DXLink Twisted Pair Input and Output Boards – HDCP Compliant boards send audio, video, control, Ethernet
and power over one standard twisted pair cable up to 200 m – 100 m to the matrix switcher and 100 m after
the matrix switcher, see the Cabling for Success with DXLink white paper for more details
Built-in NetLinx NX Integrated Controller – Easily program and manage the entire solution including source
equipment and display devices located across multiple rooms – all from a single point of control
Easily Convert Analog to Digital Signals – Use the Enova DGX Digital Media Switcher in conjunction with
DXLink Multi-Format Transmitters (Twisted Pair or Fiber), and easily integrate legacy analog sources and
automatically convert their signals to digital
Hot Swappable Video Input / Output Boards – Easily add or replace I/O boards at any time after deployment
- the system automatically recognizes the new configuration and activates the boards
3D Support – Pass through latest video formats including 3D and Deep Color
Surround Sound Support – Pass through high definition surround sound including Dolby TrueHD, Dolby
Digital, DTS-HD Master Audio, DTS, and 2-channel through 8-channel L-PCM
High Speed Digital Switching – 26 Gbps* ensures perfect pixel for pixel reproduction of video
Fully Redundant Power Supplies With Independent Power Paths – Ensures maximum reliability for
applications that require 24/7 uptime
*Enclosures manufactured on or after June 1, 2016, those manufactured before that time have a per channel
aggregate data rate of 12.8 Gbps
Specifications
Loading...