Amprobe TIC300-PRO Specifications
www.Amprobe.com
Mine Safety and Health Administration
TIC 300 PRO
Non-Contact High Voltage Detector
MSHA certified and intrinsically safe, trusted by utility crews for over 20 years
The Amprobe TIC 300 PRO high voltage detector is a
non-contact voltage detector for detecting alternating current
(AC) on transmission lines, power distribution equipment,
downed power lines, fuses, electrical outlets, and other power
lines. It detects voltages in low, medium and high voltage
applications (30-122kVAC) with bright visual and loud alerts. It is
rugged and reliable for utility, industrial, heavy manufacturing
and mine safety applications. The TIC tracers get thrown around
in utility trucks, but the units are built to withstand the rough
treatment.
The TIC 300 PRO has a low-voltage setting (30 to 1,500VAC)
for checking voltage presence in breaker panels, breakers,
power outlets and wiring. It also has a high-voltage setting
(1,500 to 122,000 V AC when used with the TIC 410A Hot Stick
attachment) for checking transmission lines, downed power
lines and substations. The presence of AC voltage is indicated
by an LED light and audible beeper. It is MSHA certied and
intrinsically safe. The TIC 300 PRO has a self-test that veries the
tester works properly and is drop-proof up to 6 feet.
TIC 300 PRO Features
• MSHA certified and intrinsically safe
• Utility tool for checking transmission
lines, power distribution equipment,
down power lines, fuses, and load
break connectors
• Visual and audible voltage indication
• High-voltage setting 1500 V ac to
122,000 V AC (with TIC 410A Hot Stick)
for utility applications such as
transmissions lines, power distribution
equipment, down power lines,
transformers and more.
• Low-voltage setting for checking
voltage presence in breaker panels,
breakers, power outlets and wiring
• A unique self-test feature so there is
no need to connect directly to a current
carrying conductor – saving your time
and keeping you safe.
• Ergonomic design with a convenient
handle
• Drop proof up to 6 feet
United States Department of Labor
MSHA
LED lights
TIC 300 PRO
High Voltage
Tester
United States Department of Labor
MSHA
Mine Safety and Health Administration
Self-test
High range
1,500 V to 122k V ac
Low range
30 V to 1,500 V ac
Shotgun adapter
for hot stick attachment
©2015 Amprobe® For detailed specications and ordering go to www.Amprobe.com 3612797 EAmprobe® | info@amprobe.com | Fluke Corporation, Everett, WA 98203 | Tel: 877-AMPROBE (267-7623)
Detailed Specifications
Specifications TIC 300 PRO
Operating Voltage
Operating Temperature 0°C to +52°C (32°F to +125°F);RH < 90% RH
Storage Temperature 0°C to +52°C (32°F to +125°F) battery removed.
Environment < 2000m,outdoor operation
Power 9 volt alkaline battery
Power Consumption
Duty Cycle Continuous
Response Time Instantaneous
Dimensions 345(L) x 75(W) x 47(H)mm (13.5 x 3.0 x 1.8 in)
Weight 243g (0.5 lb.)
Supplied with User manual, battery and carrying case
Non-Contact Voltage
Detection
Typical Sensitivity
Line voltage (kV) Phase to ground Phase to phase
phase to phase (ft-in) (m) (ft-in) (m)
0.03 to 1.0 note 1 note 1 note 1 note 1
1.1 to 15.0 2-1 0.64 2-2 0.66
15.1 to 36.0 2-4 0.72 2-7 0.77
36.1 to 46.0 2-7 0.77 2-10 0.85
46.1 to 72.5 3-0 0.90 3-6 1.05
72.6 to 121 3-2 0.95 4-3 1.29
Low Voltage High Voltage
Voltage
(Phase to neutral with 890k Ohm load)
30 V 1.5” 1.5 kV 0.5”
75 V 6.5” 2.0 kV 1”
100 V 8.5” 4.0 kV 2”
120 V 10” 10.0 kV 8”
220 V 1’1” 15.0 kV 1’2”
500 V 1’7” 20.0 kV 1’8”
1000 V 2’10” 25.0 kV 2’2”
For complete specications please download the user manual on www.Amprobe.com.
*Use only with Amprobe optional accessory hot stick and proper safety equipment for voltages up to 122 kV AC
Self-Test Verification
Detection Range (From the tip of the
probe to the target line)
Average Average
LOW Range: 30 to 1500 VAC
HIGH Range: 1500 VAC to 122 kV AC
OFF: 340uA
Low / High Detection mode: 39 mA
Range
30-1500 VAC
1500- 122,000 VAC (with Hot Stick TIC 410A)
Voltage
(Phase with no load)
Detection Range (From the tip of the
probe to the target line)
United States Department of Labor
MSHA
Mine Safety and Health Administration
All Amprobe tools, including the Amprobe TIC 300 PRO, are
rigorously tested for safety, accuracy, reliability, and ruggedness
in our state-of-the-art test lab. In addition, Amprobe products that
measure electricity are listed by a 3rd party safety lab, either UL or CSA.
This system assures that Amprobe products meet or exceed safety
regulations and will perform in a tough, professional environment for
many years to come.
©2015 Amprobe® For detailed specications and ordering go to www.Amprobe.com 3612797 EAmprobe® | info@amprobe.com | Fluke Corporation, Everett, WA 98203 | Tel: 877-AMPROBE (267-7623)
Loading...