Page 1
Data Sheet
TC253B
Temperature Adapter
Converts your multimeter to a thermometer
Key features:
°C/°F switchable
■
Uses type K thermocouple sensor ■
Includes TP255A bead probe ■
-50 °C to 1000 °C (-58 °F to 1832 °F) ■
No hassle
warranty
No waiting.
No shipping
charges.
Our commitment to
high-quality products
and customer service
is demonstrated by
our industry exclusive
“No Hassle” warranty.
In the unlikely event
that an Amprobe Test
Tool requires warranty
service, any of our
local dealers are
authorized to replace
it, on the spot.
(note: $500 MSLP limit)
Included Accessories
TC255A K-type bead probe, battery and users manual.
Optional Accessories
TP255A Replacement Bead Probe
TP254A Immersion Probe
MH101KA Master Handle Probe
TP110KA Immersion Probe*
TP120KA Surface Probe*
TP130KA Air Probe*
*TP110KA, TP120KA and TP130KA require MH101KA handle
Amprobe® Test Tools
www.Amprobe.com
Page 2
TC253B Temperature Adapter
Data Sheet
General Specifications
Output 1 mV DC per 1 °C or 1 °F
Operating Ambient 0 % to 80 % R.H. (0 °C to 35 ºC); 0 % to 70 % (35 °C to 50 ºC) R.H.
Storage Temperature - 20 °C to 60 ºC, 0 to 80 % R.H. with battery removed
Temperature Coefficient 0.15 x specification/°C, (< 18 °C or > 28 °C)
Power Standard 9 V battery, NEDA 1604, JIS 006P, IEC 6F22
Battery Life (typical) 300 hours alkaline
Low Battery Battery voltage shown when switch is in OFF position, replace if < 7.1 V
Input Connector Accepts standard miniature thermocouple connectors
(flat blades, spaced 7.9 mm, center to center)
Dimensions (HxWxD) 122 mm x 46 mm x 30 mm (4.8 in x 1.8 in x 1.1 in)
Weight (including batteries) 114 g (4 oz)
Specifications
Function Range Accuracy
°C Mode - 50 ºC to - 20 ºC ± (2.0 % rdg + 2 ºC)
- 19 ºC to 350 ºC ± (0.5 % rdg + 2 ºC)
351 ºC to 500 ºC ± (2.0 % rdg + 2 ºC)
501 ºC to 1000 ºC ± (2.9 % rdg + 2 ºC)
°F Mode - 58 ºF to - 4 ºF ± (2.0 % rdg + 4 ºF)
- 3 ºF to 662 ºF ± (0.5 % rdg + 4 ºF)
663 ºF to 932 ºF ± (2.0 % rdg + 4 ºF)
933 ºF to 1832 ºF ± (2.9 % rdg + 4 ºF)
Input Protection 60 V DC or 24 V rms
TP255A Bead Thermocouple
Temperature Range - 40 ºC to 204 ºC (- 40 ºF to 400 ºF)
Tolerances 0 ºC to 204 ºC ± (2.2 ºC or 0.75 %)
0 ºC to - 40 ºC ± (2.2 ºC or 2.0 %)
Wire Length 1 meter, with miniature plug, Teflon tape insulated
Amprobe® Test Tools
website: www.Amprobe.com
email: info@amprobe.com
Everett, WA 98203
Tel: 877-AMPROBE
Amprobe® Test Tools
Amprobe® Test Tools Europe
In den Engematten 14
79286 Glottertal, Germany
Tel.: +49 (0) 7684 8009 - 0
©2007 Am probe Test Tools. All rights res erved.
9/20 07 PN: 164 6634 D -US-N Rev D
www.Amprobe.com
Loading...