Amprobe RS-1007 PRO, AC50A, LH41A, ACD-6 PRO Catalog Page
DUAL RATED
RS-1007 PRO
RS-1007 PRO CAT IV Analog Clamp Meter
Take these clamp meters to extremes. Digital clamp meters have LCD screens that tend to freeze
below 32ºF (0ºC), but the Amprobe analog clamp meters can take extreme heat or cold and keep
on measuring amps and volts without problems or batteries.
• Easy-to-read rotary scale
• Works in temperatures from 5ºF to 122ºF
• Does not need batteries to measure volts
or amps
FEATURE RS-1007 PRO
AC Volt age 150 V, 300 V, 600 V
AC Current 15 A, 40 A, 100 A, 300 A, 1000 A
Resistance
Continuity •
Accommodates Conductors up to 1.88” (47 mm) in diameter
INCLUDED ACCESSORIES: Test leads, battery (installed, for resistance
measurement only), user manual, carrying case
• Operates on 50Hz and 60Hz frequencies
• Pointer lock - data hold
1000
Ω
AC50A
LH41A
ACD-6 PRO
Recommended Accessories
RS-1007 PRO,
ACD-6 PRO
TL35B
Test Leads
(See Page 56)
ACD-6 PRO
ELS2A
AC Line
Splitter
(See Page 56)
AC50A Leakage Current
Clamp Multimeter
Great for applications requiring measurement of
leakage and fault currents, this clamp measures low
AC current down to microamps.
• Min/max control to see largest/smallest values in a
series of measurements
• Relative value measurement to determine differentials
• Data hold to freeze measurement value on the display
• Digital display with analog bargraph
LH41A AC/DC Low
Current Clamp Meter
This highly accurate leakage clamp takes
precise low-current measurements with
1mA resolution up to 4A; 10mA resolution
from 4A to 40A
• Data hold
• Auto power off
• Auto zero button to zero display for DC
• Excellent accuracy and resolution
• Auto power off to save battery life
• Minimum resolution 0.01 mA
FEATURE AC50A LH41A
AC Volt age
AC Current
DC Current
Resistance
Continuity
Accommodates Conductors
INCLUDED ACCESSORIES: Batteries (installed), user manual,
test leads (AC50A only), carrying case (AC50A only)
40.00 mA, 400.0 mA, 4.000 A,
up to 1.2” (30 mm) in diameter up to 0.78” (20 mm) in diameter
400.0 V –
40.00 A, 60.0 A
– 4.000 A, 40.00 A
Ω
400
• –
AC50A
4.000 A, 40.00 A
–
ACD-6 PRO Digital Clamp Meter
This high-current clamp doubles as a multimeter for AC and DC voltage, resistance and continuity.
• Auto and manual ranging
• Relative zero mode
• Auto power off
MEASUREMENTS ACD-6 PRO BEST ACCURACY
DC Voltage
AC Volt age
AC Current
Resistance
Accommodates
Conductors
INCLUDED ACCESSORIES: Carrying case, batteries (installed), user manual
400.0 mV, 4.000 V, 40.00 V, 400.0 V, 600 V 1.0% + 3 LSD
400.0 A, 1000 A 1.5% + 5 LSD
400.0 Ω, 4.000 kΩ, 40.00 kΩ, 400.0 kΩ, 4.000 M
up to 1.77” (45 mm) in diameter
• Data hold
• Diode test
• Audible continuity
600 V 2.0% + 5 LSD
Ω,
40.00 M
Ω
1.0% + 4 LSD
–
10
ELS2A AC Line Splitter
Measure the current on a 2-wire or 3-wire power cord up to 15 A without
having to cut off the plug and separate the conductors, or open electrical
boxes on 120 V lines. Use with any Amprobe clamp meter.
• Two measurement loops, 1X and 10X for increased sensitivity
• Built-in voltage measurement jacks to check for voltage sags and surges
• Rated for 120 V, 15 Amps
ELS2A
Loading...