Amprobe NCV-1000 Operating Manual

NCV-1000
Series

Non-Contact
Voltage Probe

User Manual

Manual de usuario
Manuel de l’utilisateur
Manual dos Usuários

NCV-1000 Series

Non-Contact Voltage
Probe

User Manual

6/2017, 6009474 Rev A
©2017 Amprobe
All rights reserved. Printed in China

English

Limited Warranty and Limitation of Liability

Your Amprobe product will be free from defects in material
and workmanship for one year from the date of purchase
unless local laws require otherwise. This warranty does
not cover fuses, disposable batteries or damage from
accident, neglect, misuse, alteration, contamination, or
abnormal conditions of operation or handling. Resellers
are not authorized to extend any other warranty on the
behalf of Amprobe. To obtain service during the warranty
period, return the product with proof of purchase to an
authorized Amprobe Service Center or to an Amprobe
dealer or distributor. See Repair Section for details. THIS
WARRANTY IS YOUR ONLY REMEDY. ALL OTHER WARRANTIES

- WHETHER EXPRESS, IMPLIED OR STATUTORY - INCLUDING
IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR
PURPOSE OR MERCHANTABILITY, ARE HEREBY DISCLAIMED.
MANUFACTURER SHALL NOT BE LIABLE FOR ANY SPECIAL,
INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR
LOSSES, ARISING FROM ANY CAUSE OR THEORY. Since some
states or countries do not allow the exclusion or limitation of
an implied warranty or of incidental or consequential damages,
this limitation of liability may not apply to you.

Repair

All Amprobe returned for warranty or non-warranty repair
or for calibration should be accompanied by the following:
your name, company’s name, address, telephone number,
and proof of purchase. Additionally, please include a brief
description of the problem or the service requested and
include the test leads with the meter. Non-warranty repair
or replacement charges should be remitted in the form of a
check, a money order, credit card with expiration date, or a
purchase order made payable to Amprobe.

In-warranty Repairs and Replacement – All Countries

Please read the warranty statement and check your battery
before requesting repair. During the warranty period,
any defective test tool can be returned to your Amprobe
distributor for an exchange for the same or like product.
Please check the “Where to Buy” section on amprobe.com
for a list of distributors near you. Additionally, in the United
States and Canada, in-warranty repair and replacement units
can also be sent to an Amprobe Service Center (see address
below).

Non-warranty Repairs and Replacement – United States and
Canada

Non-warranty repairs in the United States and Canada
should be sent to an Amprobe Service Center. Call Amprobe
or inquire at your point of purchase for current repair and
replacement rates.

USA: Canada:
Amprobe Amprobe
Everett, WA 98203 Mississauga, ON L4Z 1X9
Tel: 877-AMPROBE (267-7623) Tel: [phone]

Non-warranty Repairs and Replacement – Europe

European non-warranty units can be replaced by your Beha­Amprobe distributor for a nominal charge. Please check the
“Where to Buy” section on beha-amprobe.com for a list of
distributors near you.

Beha-Amprobe
Division and reg. trademark of Fluke Corp. (USA)

Germany* United Kingdom
In den Engematten 14 52 Hurricane Way
79286 Glottertal Norwich, Norfolk
Germany NR6 6JB United Kingdom
Phone: [phone] - 0 Phone: [phone]
beha-amprobe.de beha-amprobe.com

The Netherlands - Headquarters**
Science Park Eindhoven 5110
5692 EC Son
The Netherlands
Phone: [phone]
beha-amprobe.com

*(Correspondence only – no repair or replacement avail­able from this address. European customers please contact

your distributor.)
**single contact address in EEA Fluke Europe BV