Amprobe NCV-1000 Specifications
NCV-1020, NCV-1030, NCV-1040
Non-Contact Voltage
Probe Series
Check voltage, find cable breaks, identify polarity,
and magnetic detection
The Amprobe NCV-1000 Non-Contact Voltage (NCV) tester series
provides maximum safety and convenience for detecting AC voltage
without interrupting electrical systems. Designed to conveniently t in
your shirt pocket, the NCV-1000 series performs in indoor and outdoor
settings. Safety tested to the highest category measurement, CAT IV
1000 V, as well as IP65 water and dust resistant, the NCV-1000 series is
t for the toughest industrial applications.
amprobe.com
NCV-1000 Series
Non-Contact Voltage Probe
Non-contact voltage detection
Default: 50-1000 V
High Sensitivity: 12-50 V
(NCV-1030 and NCV-1040 only)
Audible (buzzer) and visual (LED)
voltage indication
Additional Features
• Low battery indication
(NCV-1030 and NCV-1040 only)
• Auto power off
(NCV-1030 and NCV-1040 only)
• IP65 rated water and
dust resistant
Magnetic solenoid testing
(NCV-1040 only)
On/Off switch
Built-in work light
(NCV-1030 and NCV-1040 only)
NCV-1040
Non-Contact
Voltage Probe
Safety Certication
All Amprobe tools, including the Amprobe NCV-1000 Series are rigorously
tested for safety, accuracy, reliability, and ruggedness in our state-of-the-art
test lab. In addition, Amprobe products that measure electricity are listed by a 3rd
party safety lab, either UL or CSA. This system assures that Amprobe products meet
or exceed safety regulations and will perform in a tough, professional environment
for many years to come.
©2018 Amprobe® For detailed specications and ordering go to amprobe.com 6009731 AAmprobe® | info@amprobe.com | Fluke Corporation, Everett, WA 98203 | Tel: 877-AMPROBE (267-7623)
amprobe.com
Test wires for AC voltage Breaker scanning Test wall sockets for AC voltage Built-in worklight
(NCV-1030, NCV-1040)
Applications:
• Detect the presence of
AC voltage in cables,
circuit breakers, wall
sockets, junction boxes,
fuses, extension cords
• Test voltage through wire
insulation
• Identiy cable breaks in
wires, cords and lightning
systems connected in
series
• Identiy polarity (line
vs. neutral) of receptacles
and cables
• Detect magnetic solenoid
to diagnose electromagnets
and relays (NCV-1040 only)
Specifications
Features NCV-1020 NCV-1030 NCV-1040
Voltage detection from
50 to 1000 V AC
Audible (buzzer) and visual (LED)
voltage indication
On/Off switch
IP65 rated water/dust resistant
CAT IV 1000 V safety rated
Built-in work light
NCV high sensitivity range
(12 V to 50 V AC)
Low battery indication
Auto power off
Magnetic solenoid testing
Detailed Specications
Operating Voltage Range 50-1000 Vac, 50-400 Hz 12-50 Vac, 50-1000 Vac, 50-400 Hz 12-50 Vac, 50-1000 Vac, 50-400 Hz
Voltage Indication Bright red LED, buzzer
Magnetic Field Indication – – Yellow LED
Detection of Magnetic Field – – >2.5 mT
Detection Illuminates at approximately 0.39 in (10 mm) distance from a wire carrying 120 Vac
Temperature Range 32 °F to 104 °F (0 °C to 40 °C), ≤ 80% RH
Storage Conditions 14 °F to 104 °F (-10 °C to 40 °C), ≤ 85% RH
Operating Altitude ≤ 6561 ft (2000 m)
Power Supply 2 1.5 V LR03 AAA batteries
Duty Cycle Continuous
Current Consumption Approx. 80 mA
Dimensions (L x W x H) 6.14 x 0.92 x 1.08 in (156.2 x 23.5 x 27.5 mm)
Weight (with batteries installed) Approx. 0.12 lb (58 g) Approx. 0.13 lb (60 g) Approx. 0.133 lb (62 g)
Safety Compliance
EMC Compliance IEC 61326-1
Certications
Included: 2 x 1.5 V Batteries (installed), User Manual
• • •
• • •
• • •
• • •
• • •
– • •
– • •
– • •
– • •
– – •
IEC 61010-1 3rd Ed., UL61010-1 2nd Ed. and
CAN/CSA-C22.2 No. 61010-1-04 +Update No. 1:2008 to CAT IV 1000 V, Pollution degree 2, IP65
©2018 Amprobe® For detailed specications and ordering go to amprobe.com 6009731 AAmprobe® | info@amprobe.com | Fluke Corporation, Everett, WA 98203 | Tel: 877-AMPROBE (267-7623)
Loading...