Amprobe ECB50A Data Sheet

No hassle

150V

warranty

No waiting.

No shipping charges.

Our commitment to high-quality products and customer service is demonstrated by our industry exclusive “No Hassle” warranty. In the unlikely event that an Amprobe Test Tool requires warranty service, any of our local dealers are authorized to replace it, on the spot.

Data Sheet

ECB50A

Circuit Breaker Finder and AC Cable Tracer

Three testers in one

■ Identify circuit breaker to an electrical socket

■ Trace AC cables in walls

■ Sort wires in a bundle

■ Microprocessor controlled

■ Coded transmission allows

easy separation of transmitter signal

■ Audible and visual indicators

■ Low battery indicator

■ Cable tracing depth – up to 40 cm

■ NEMA 5-15 plug

Included Accessories

Padded carrying case, 9V battery, user’s manual

(note: $500 MSLP limit)

Amprobe® Test Tools

ECB50A Circuit Breaker Finder and AC Cable Tracer

General Speciﬁcations

Transmitter

Operating temperature range -10 °C to 40 °C (14 ° to 104 °F ) at max 80 % R.H. Dimensions 70 x 55 x 86 mm (2.8 x 2.1 x 3.4 in) Weight Approximately 65 g (2.3 oz) Overvoltage category CAT III 150 V Pollution degree 2, Protection Class: IP20

Receiver

Sensitivity setting Using On/Off control Low battery indication 7.5 V Switching fuse/cable manually using Fuse-Line switch Operating temperature range -10 °C to 40 °C (14 ° to 104 °F) at max 80 % R.H. Dimensions 22 x 162 x 34 mm ( 0.9 x 6.4 x 1.3 in) Weight Approximately 100 g (3.5 oz) Overvoltage category CAT III 300 V Pollution degree 2, Protection Class: IP20 Power supply 9 V battery, IEC 6LR61, Alkaline only Applicable directives EMC: EN 50081-1 and EN 50082-1, EN61010-1:2001

and standards

Data Sheet

Specifications (Valid for 23 °C ± 5 °, for less than 80 % relative humidity)

Transmitter

Voltage range 100 V to 150 V Power consumption approximately 1 W Frequency range 50/60 Hz Transmission frequency Approximately 8 kHz Transmitter frequency Approximately 10 Hz

Receiver

Tracing depth for fuse Approximately 0 to 10 cm (4 in) depending on local conditions identification

Tracing depth for cable location Approximately 0 to 40 cm (15 in) depending on local conditions

Amprobe® Test Tools