Amprobe CR50A, LCR55A, R-115S, RC-120S Catalog Page

CR50A

LCR55A

TOP R ATED

“Very reliable.”

“We work in the HVAC industry and capacitors are a common issue. The Amprobe LCR55A Capacitance Tester has been a great investment and time saver. A quick check and record has identified weak capacitors and saved us from costly call backs.”

- LCR55A customer reviews

CR50A Capacitance Tester

Inspect and verify components for quality control by quickly checking circuits with this full-range capacitance and resistance meter.

• Dual zero adjustments pots to null strays and test leads

• Special “low ohms” range

• “Zero adjust” pots for low ohms and capacitance ranges

• Low battery indication

LCR55A Inductance, Capacitance and Resistance Tester

The ultimate electronic component verifier measures inductance, capacitance, resistance, transistors, diodes and microwave diodes.

• Plug-in test slots and test leads with threaded alligator clips for precision testing

• Data hold and max hold

FEATURE CR50A LCR55A

Resistance

Capacitance 200 pF, 2000 pF, 2 µF, 20 µF, 200 µF, 2 mF, 20 mF 200 pF, 2000 pF, 2 µF, 20 µF, 200 µF, 2 mF

Inductance - 200 µH, 2 mH, 200 mH, 200 H

Transistors - Hfe, Iceo (NPN, PNP)

Diodes • Standard (3 V) & microwave oven (8 V)

Continuity Test

INCLUDED ACCESSORIES: User manual, test leads with alligator clips, battery (installed)

20 Ω, 200 Ω, 2 kΩ, 20 kΩ, 200 kΩ,

, 20 M

2 M

• •

• “Zero adjust” pot for ohms

• Low battery indication

• Auto power-off

20 Ω, 200 Ω, 2 kΩ, 20 kΩ,

2 M

, 20 M

R-115S

RC-120S

R-115S Remcon Momentary Switch Relay (3-wire) RC-120S Remcon Closet Light Relay (2-wire)

When you need low-voltage control circuits for safe operation in industrial and process control environments, choose these low-voltage relays with built-in transformers. Each unit operates independently, so you can install one relay and operate it with as many switches as needed or control multiple relays with a single switch.

• Uses light 22 gauge wire, saving the time and expense of pulling Romex or armored cable

• Simplifies wiring – no need to wire back to separate low voltage transformers

FEATURE R-115S RC-120S

AC Volt age 105 V

AC Current Up to 6.5 A (1/4 HP max motor load at 120 V)

Frequency 60 Hz

Safe Control Switching, Maximum 10 V DC 10 milliamps

• Operates silently so you can install relays at the fixture instead of at a remote location

^ 125 V