Amprobe AT-7030 Specifications
AT-7000 Advanced
Wire Tracer
Wire Tracing Reinvented
Get accurate results in minutes with new features and technologies
that simplify wire tracing and breaker identication. The Receiver’s
patented Smart Sensor,™ with its innovative new antenna design and
advanced signal processor, clearly displays the location and orientation
of energized wires in walls, oors and ceilings on the large color TFT LCD
screen. The powerful Transmitter utilizes two optimal frequencies for
both energized and de-energized wire and breaker tracing, delivering
consistently accurate results for novice users and experts alike. The new
Scan and Locate feature clearly identies the one correct breaker or fuse,
eliminating the confusion from multiple false positive readings common
in older technology tracing tools.
Tip Sensor
AT-7000-R
Receiver
AT-7000-T
Transmitter
AT-7000 Features
• Traces wires in walls, ceilings,
floors and corners
• Locates breakers and fuses
Non-Contact
Voltage (NCV)
Smart Sensor
(Back)
Large bright TFT
LCD full color
display
Signal sensitivity
adjustment (-/+)
Enter key for
selecting functions
4-way
navigation
keys
Hot Stick
attachment adapter
(TIC 410A)
™
• Pinpoints shorts and opens
• High resolution 3.5” TFT LCD
color display
• Three power modes
– ”High” power mode for normal
circuits
– ”Low” power mode for precision
tracing in difcult areas
– ”Clamp” power mode provides a
boosted signal using signal clamp
• Two automatically selected
frequency modes for optimal
tracing on energized and
de-energized circuits
• Signal booster rechargeable
battery pack (BR-7000-T)
increases transmitter
signal strength
• Clamp-on attachment (SC-7000)
for inducing signal into
wires without access to bare
conductors
• Embedded help screens make
set-up easy and error free
AT-7000-R Receiver
©2014 Amprobe® For detailed specications and ordering go to www.Amprobe.com 6003703 BAmprobe® | info@amprobe.com | Fluke Corporation, Everett, WA 98203 | Tel: 877-AMPROBE (267-7623)
AT-7000 Features and Functions
Tip Sensor
AT-7000-R
Receiver
Tip Sensor
The shape of the tip sensor allows tracing in
hard to reach areas, corners & tight spaces,
as well as precise circuit breaker and fuse
identication. By utilizing two different types of
antennas (inductive coil and capacitive), the tip
sensor enables optimal tracing results of both
energized and de-energized circuits, which are
automatically selected by operating mode.
SC-7000
Signal Clamp
Smart Sensor
AT-7000-R
Receiver
™
Smart Sensor™
Quickly and easily determine the precise
direction and location of energized wires in
walls, oors and ceilings with the patented
Smart Sensor™. Combined with a fast signal
processor that measures small changes in the
detected signal multiple times per second, this
new technology provides unmatched precision
and ease of use for tracing energized wires.
Signal Clamp
When there’s no access to bare conductors, use
the SC-7000 signal clamp to induce a signal into
either energized or de-energized circuits for
wire tracing and load locating. The AT-7000-T
transmitter’s “clamp” mode provides a boosted 6
kHz signal through the clamp to further improve
accuracy and performance.
Power Mode
Buttons (High,
Low, Clamp)
AT-7000-T
Transmitter
AT-7000-T Transmitter
Featuring three power modes “high”, “low”,
and “clamp” and two output frequencies (6kHz
and 33 kHz), the AT-7000-T incorporates the
best technologies available for optimal wire
tracing and breaker identication on both
energized and de-energized circuits. The AT7000-T automatically sets the frequency based
on detected voltage, and prompts the user to
set the power level based on their application.
The color TFT LCD screen displays the detected
voltage, frequency output and power mode.
The AT-7000 Advanced Wire Tracer is available in two feature-packed kits
Features AT-7020 Kit AT-7030 Kit
Traces Energized and De-Energized Wires
Locates Energized and De-Energized Breakers
Pinpoints Shorts and Opens
Three Power Modes
• ”High” power mode for normal circuits
• ”Low” power mode for precision tracing in difcult areas
• ”Clamp” power mode provides a boosted induction signal via the signal clamp
Two Frequency Modes for Optimal Tracing
• 6 kHz for energized circuits
• 33 kHz for de-energized circuits
Signal Booster Rechargeable Battery Pack (BR-7000-T)
• Longer life LI-ION battery
• Recharges when AT-7000-T transmitter plugged into energized circuit
• Improved signal for open and energized tracing
• Boosted signal when in “Clamp” mode
Signal Clamp (SC-7000)
• Clamp-on attachment for inducing signal into wires without access to bare conductors
©2014 Amprobe® For detailed specications and ordering go to www.Amprobe.com 6003703 BAmprobe® | info@amprobe.com | Fluke Corporation, Everett, WA 98203 | Tel: 877-AMPROBE (267-7623)
⚫ ⚫
⚫ ⚫
⚫ ⚫
⚫ ⚫
⚫ ⚫
(optional)
(optional)
⚫
⚫
Loading...