AT-3500 Underground Cable/Pipe Locator System
Keep productivity high and operational costs low, with the AT-3500. This rugged, economical
solution helps you locate underground energized and de-energized wires, cables and pipes. Great
for parking lot and airport lighting applications, it precisely pinpoints buried services, with
exceptionally fast sound and meter response.
• Precisely pinpoint buried cables and wires
• Three testing modes for best accuracy:
– Passive power (50 Hz / 60 Hz)
– Passive radio (RF)
– Active T-3500 signal generator with induction
mode directly connected to the cable with
test leads or optional clamp
• Proven 33 kHz frequency for most
locating applications
• Avoid lines at utility construction sites with
highly sensitive power and radio modes
• Take depth measurements up to 16’ (4.9m)
• Backlit multiple-segment digital display with
audible alerts to show and tell location of
buried cables
• Semi-automatic gain control for fast signal
location and control
AT-3500
Recommended Accessories
SC-3500 Signal Clamp
MLS55-3 Pipe Transmitter
SC-3500
MLS55-3
TOP RATE D
“Great for finding
depth and location”
“I‘ve used one for years locating
phone and gas lines and it works
great. I can find and track wire
or pipe and also know how deep
within a few inches for digging
and locating.”
- AT-3500 customer reviews
FEATURE AT-3500
Depth Measurement 16 ft (4.9 m)
Passive Tracing Frequencies 50 Hz / 60 Hz
Transmitter Frequency Single, non-adjustable
Receiver Active Frequencies (Hz) 32.768 kHz
Receiver Passive Frequencies (Hz)
Receiver Depth Display Accuracy
Receiver Depth Range Maximum 16 ft (4.9 m)
INCLUDED ACCESSORIES: Receiver, transmitter, connection cables, ground stake, carrying case,
user manual, batteries (installed)
Depth DepthSignal Strength
Range 2: power network 50 Hz / 60 Hz; optionally 100 Hz
Range 1: radio 15 kHz to 23 kHz
(can be adjusted by Amprobe service personnel)
Range 1: radio +/- 20%
Range 2: power network +/- 20%
Range 3: transmitter +/- 5% (>5 m (6 ft),
+/- 20% (<5 m (15 ft)
26