Amplicom Amplifyz TCL User Manual

TCL PULSE

USER GUIDE

(For iPod, iPhone and iPad)

Main Unit

Location of Control

1. Snooze button /
LED indicator

2. Pair

3. Reset

4. Alarm

5. Battery
Compartment

6. Battery door

4 3 2

5

1

6

Features

Thank you for purchasing the Vibration Alarm. This product
is designed as a Vibration Alarm by working with your iPad,
iPhone, iPod or other iOS devices.

- With iOS version 7 or above;

- With Bluetooth version 4.0.

- Set wake up buzzer alarm or Vibration Alarm with snooze
function, up to 10 alarms.

- Take full control of the Vibration Alarm with i-device app
via Bluetooth Low Energy.

- Select different alarm tone pattern and volume to different
alarms.

- Set count down timer.

- Monitor the battery status of the Vibration Alarm and have
battery warning if it is at low level.

Before you start using it

• Please make sure to read the instruction manual
carefully.

• Following and respecting the instuctions in your
manual will prevent damage to your instrument and
loss of your statutory rights arising from defects due
to incorrect use.

• We are not liable for any damage occuring as a
result of non-following of these instructions. Likewise,
we take no responsibility for any incorrect readings
and for any consequences which may result from
them.

• Please take particular note of the safety advice!

• Please keep this instruction manual for future
reference.

Getting started

1. Install battery:

1.1 Open the Battery Compartment.

1.2 Insert 3 x AAA batteries in polarity (+) and
(-) as indicated.

1.3 Close the battery Compartment.

2. Install App on your smartphone.

2.1 Access app store and search for .

2.2 Select and install App on your
mobile device.

BLE

Pairing the Vibration Alarm

3. Pair the Vibration Alarm with TCL Pulse app.

3.1 Before running the TCL Pulse app, make sure the
Bluetooth is turned ON at your i-device.

BLE

3.2 After you tap the app icon , the ‘Nearby Devices’
screen appears. You need to pair the vibration alarm
device before you enter the main app screen.

ALARM

Pairing the Vibration Alarm

3.3 Tap “ Pair New Device”
to search for nearby
devices.

3.4 Press and hold the [PAIR]
button on the Vibration
Alarm device for 5
seconds. You can find
that the flashing LED will
turn from red to blue.

3.5 The New Vibration Alarm
will be displayed on App
and is ready for pairing.
Tap the "New Vibration
Alarm" will start the pairing
and connection process.
Once the Vibration Alarm
is paired, it will start time
and data synchronization.

Pairing the Vibration Alarm

3.6 After the connection is made, the following information
will be synchronized:
i) Current time and date
ii) Alarms & timer setting
iii) Unit battery level

3.7 When the Vibration Alarm is paired with one i-device,
other i-devices cannot pair with it again.

3.8 One i-device can pair up to 5 Vibration Alarm.

Rename the Vibration Alarm

4. Rename the device.
Tap the device name (default is “Vibration Alarm”) at
the top of the screen to edit the Vibration Alarm device
name.