AMPEG BSE410H Owner's Manual
BSE410H
Series
Bass Cabinets
Please read this user’s guide prior
to using your new enclosure.
BSE410HS
BSE410H
BSE410HLF
BSE410H Series Bass Cabinets
Ampeg BSE410H Series 4x10 Bass Cabinets are quality
two-way speaker cabinets suitable for all venue sizes.
The cabinets feature heavy duty recessed handles, removeable casters, and a heavy gauge steel grill for maximum speaker
protection.
The jackplate features two 1/4” jacks wired in parallel,
allowing easy daisy chaining from one speaker to another. Each
of the jacks may be used as an input or a through connection.
The three position HF Horn switch allows for:
• Full high frequency output (0 setting)
• -6dB reduction of the high frequencies though the
horn (-6 setting)
• Horn shutoff (off setting)
IMPORTANT SAFETY INSTRUCTIONS:
1.Read, follow and keep these instructions. Heed all warnings.
2.This speaker is capable of producing high sound pressure levels that may cause
permanent hearing damage. User caution is advised and ear protection is recommended during use.
3.This speaker is designed for use on a level floor or mounted to a properly rated
speaker stand with the supplied stand mount adapter. The use of a speaker stand
poses a risk of personnal injury. Installations should be performed by a professional installer in accordance with local building codes.
4.Speaker cables are a tripping hazard and must be routed out of traffic areas and
away from any possible accidental contact.
5.Do not expose this speaker to rain or moisture. Do not place liquid filled containers on this speaker. Clean only with a damp cloth.
6.Repair or service of this speaker should be performed only by qualified personnel.
Loading...