STATIONARY
BOWL MIXER (SBM)
• 1600 lb., 2000 lb. and 2400 lb. capacity
• Reliable performance
Features &
Benefits
Two-speed gearmotor, specifically designed for mixer use, TEFC, with thermal overload protection.
Drive chain and drive sprocket run in an oil bath, assuring constant lubrication of the system.
• The mixer frame is entirely fabricated of solid stainless steel.
• Stainless steel wide type bumper.
• Stainless steel end doors and crowns.
• Pneumatic assembly.
Mechanical
Specifications
STATIONARY BOWL MIXER
Bowl And Cooling Jacket
• All stainless steel one piece bowl construction.
• Bowl plate 5/16” thick.
• Bowl end plate 3/8” thick jacketed.
• Bowl jacket 1/4” “L” type breaked & welded.
• Reinforcement belts are added to the bowl jacket for
maximum resistance to shock.
• Refrigerated bowl sides.
• Bowl insulated with urethane foam.
• Stainless steel bowl drain valve.
• D.X. expansion valves or Glycol valves are included.
• Bowl tested at 250 PSI.
Top Assembly
• Solid stainless steel.
• The 12” diameter pneumatic sliding flour gate
• Two 2” stainless steel sanitary liquid inlets.
Door and Door Shaft Assembly
• Reinforced stainless steel door.
• Air operated door seals.
• Door racks and pinions.
Electrical
Specifications
• Nema 12 remote enclosure (painted steel) including:
Square D main breaker.
Full voltage magnetic Nema rated starters.
Pre-wired terminal strip.
• Operator panel contains the following:
Eagle digital plug-in timers for high and low speed.
Eagle digital plug-in refrigeration timer.
Digital bowl temperature indicator.
Allen Bradley push-buttons for the following functions:
Mixing (slow, fast, stop)
Door (up, down, stop)
Flour gate (open, close)
Refrigeration selector OFF/ON/AUTO
Alarm (acknowledge/reset)
Safety/jog
Emergency stop
• Nema 1 Gemco cam switch.
• Nema 12 junction box, terminal blocks, prewired motors
and controls.
Agitator and Drive Assembly
• Solid stainless steel “Y” type spiders split at main shaft and
agitator bars.
• Stainless steel primary agitator bars mounted on lubrication
free U.H.M.W. bushings.
• Stainless steel secondary agitator bars mounted on lubrication
free U.H.M.W. bushings.
• Solid stainless steel main shaft mounted on spherical bearings.
• Sanitary split seal assembly.
• Agitator is chain and sprocket driven.
• Chain lubrication by oil bath.
• Standard agitator RPM 35/70 (consult for other RPM available).
MIXER
1600 lb.
2000 &
2400 lb.
• Bowl door gearhead motor with electric brake and components.
• Weg drive motor (copper rotor) integral mount with
NORD Gear reducer.
• Motor overheat protection installed in stator winding.
• High/low speed jog operation with special anti-jog function.
• CAD produced electrical wiring diagram.
• Equipment meets OSHA requirements.
AB C D E F
5
16"
17"
7' - 7
7' - 10
5
/8"
/8"
9' - 5
9' - 6
3
8' - 7"
/4" 9' - 1 1/4"
3
9' - 0"
/4" 9' - 6 1/4"
1
54-
/8"
59-1/8"
Options
Mechanical Options
• Extra liquid inlet.
• 12” O.D. butterfly valve in lieu of sliding flour gate.
• Stainless steel air operated front sliding type sponge door.
• Stainless steel air operated rear hinge type sponge door.
• Stainless steel ingredient door with safety bars.
• Stainless steel refrigerated door (with hoses and valves).
• Double extra heavy stainless steel primary agitator bars
(5/8” wall) 4” O.D.
• Anti-vibration pad.
• Belt drive.
For more information please call
your Account Manager or 1-800-BAKERS-1.
Headquarters
AMF Bakery Systems
2115 West Laburnum Avenue
Richmond, Virginia 23227
1-800-225-3771 or 804-355-7961
FAX: 1-804-342-9724
European operation
West Park Ring Road
Leeds LS16 6QQ England
Tel.: 1132-787110
Fax: 1132-741415
Electrical Options
• Eagle digital salt timer with alarm.
• Newport digital thermometer.
• Ampmeter.
• Total time clock (mounted in remote enclosure).
• Nema 4 gemco cam switch in lieu of Nema I.
• Allen Bradley programmable controller SLC 500 series.
• Allen Bradley PanelView 550 operator interface.
• Ampmeter (displayed on operator interface).
• Wattmeter (displayed on operator interface).
www.amfbakery.com sales@amfbakery .com
AMF’s continuing engineering is constantly improving product performance. Consequently machinery specifications are subject to change without notice.
08/2002
13-K-07