Ametek MTC- 650 A Specifications
MTC- 650 A
Marine Temperature
Calibrator
Save Time, Save Money
Up to 3 Year Calibration Interval
Maximize accuracy with a one year recommended calibration interval, or lower your cost
of ownership by extending your interval up to three years! Reduce costs associated by
recalibration and managing assets by 66%.
Fast Calibration
The MTC-650 A contains an innovative heating block prole, which heats up to
650° C / 1202° F in only 18 minutes. The special heating prole minimizes mass and yet, still
accepts an insertion tube with a 1 in (26 mm) outer diameter. It’s the perfect compromise
between temperature stability, homogeneity, and rapid heating and cooling.
With wide temperature ranges from 28 to 650° C /
82 to 1202° F, the MTC-650 A portable temperature
calibrator facilitates correct readings on all of your
temperature monitoring devices.
Maintain and Calibrate
monitoring devices for:
Fuel oil inlet
Exhaust gas
Crankcase protection
Turbine & gear bearings
Steam
Servo oil propeller pitch
Puriers
Starting air
Hydraulic systems
Oil burner
Lubricating oil systems
Scavenge air
Sea water cooling
Charge air
Uptake gas
Feed water
Cooling water outlet
Refrigeration systems
Gland steam
Condensing system
Easy to Read, Intuitive Operation
The MTC-650 A temperature calibrator is simple to operate. Access to the most commonly
used functions, such as Set, Preset, Switch test and Auto step, is only one click away. An
easy-to-read and very informative color display oers a full overview of the calibration task
you are currently performing. The editable elds are marked in light blue. Navigating is
fast and easy using arrow keys and the enter key.
Generators
Safety Valves
Turbo-charger lubrication
Cylinder/piston/fuel valve cooling media
Thrust/shaft/plane/stern tube bearings
Main steam
Condensers
Multi-Information Display
Status Bar
Shows information about
recalibration due status and hot/
cold safety warnings and keeps
track of date and time.
Calibration Settings
Shows the actual calibration
settings for reference sensor and
stability criteria. Can be accessed
and changed directly in the
display by use of the arrow keys.
Calibration Status
Shows current status of the
calibrator, like heating/cooling,
stability achieved and expected
time to stability.
Function Bar
Shows the current possibilities of
the function keys.
Function Keys
The function keys serve as shortcuts to the main functions
like Set, Preset, Auto step and Switch test. When entering
one of the functions the function key shows the options
within the selected function.
Informative color display and
intuitive operation
The MTC-650 A is designed with an easy to read
and very informative color display that gives you a
full overview of the calibration task you currently
are performing.
Loading...