Ametek IPI015G, IPI030C, IPI100A, IPI100C, IPI300C Data sheet
...
pressure
Industrial Pressure Indicator
IPI Mk. II
Intrinsically
» Wide pressure range
IPI015G 1 bar / 15 psi
IPI030C 2 bar / 30 psi
IPI100A 7 bar absolute / 100 psi
IPI100C 7 bar / 100 psi
IPI300C 21 bar / 300 psi
IPI500C 35 bar / 500 psi
IPI01KG 70 bar / 1,000 psi
IPI02KG 140 bar / 2,000 psi
IPI03KG 200 bar / 3,000 psi
IPI05KG 350 bar / 5,000 psi
IPI10KG 700 bar / 10,000 psi
» High accuracy
±0.05% of F.S. for positive pressure.
Vacuum calibration to 35 bar / 300 psi.
Compound ranges are indicated with “C” in
type number
» A true field indicator
Lightweight and portable with full temperature compensation, long battery life and
large display for easy visibility
» IPILOG Data logging
Comprehensive data logging facilities. Log
pressure and temperature data, triggered by
time or threshold (option)
safe
» Complete marine program
Part of a complete program of marine
approved temperature, pressure and signal
calibrators; including temperature sensors
» ATEX and CSA certification
The IPI Indicator is ATEX and CSA certified
and designed for use in potentially explosive
environments
ISO 9001 Manufacturer
Specification Sheet
SS-IPI Mk. II
The JOFRA IPI Mk. II brings together the ease of an analog gauge with
the accuracy and easy-to-read display of a digital calibrator.
IPI Mk. II is ATEX and CSA certified for use in potentially explosive environments such as oil refineries, chemical plants and offshore platforms,
where flammable gases are used or stored.
This series is designed to meet your pressure measurement application
needs and make your work easier. The IPI offers 18 different pressure
units, long battery life, high accuracy and serial communications. The
accuracy of the IPI Mk. II rivals high-end pressure calibrators and is temperature compensated for workshop use or in process applications.
Combined with IPILOG, you get a high-performance solution for pressure data logging applications. Whether you need to log data on one IPI
or many, IPILOG is easy to use and is a low-cost application that can
handle all of your requirements. IPILOG configures the gauge to operate in ad-hoc mode (field configuration) or download mode (computer
configuration) for complete flexibility in configuring your data logging
applications.
The IPI Mk. II is available as an indicator or in one of six test-ready systems that are complete and equipped to meet your pressure measuring
or testing needs.
Easy setup
Setup of the IPI Mk. II is fast and straight forward, through
a menu-driven display. With minimal text and intuitive functions, the unit is simple enough to be used anywhere in the
world, without the need for multilingual displays.
The CONFIG key is used in conjunction with the and
functions above the ZERO and MAX/MIN keys to select
and change different functions.
You can set one of 20 engineering units, change the autoshutoff function setting, display the actual battery voltage, display the actual temperature (in °C or °F), turn the
dampening on or off, change the sample rate and set the
Tare value. In addition to the 20 available engineering units
on the IPI Mk. II, you can create your own unit to meet your
measurement needs.
Easy-to-read display
The large, 5 1/2 digit, 0.65 in (1.65 cm) character display is
large and easy-to-read, even from a distance. Icons indicate
battery life and engineering units and a bar graph shows the
percentage of scale reading. All of this information can be
read in low light with the use of the backlight.
Auto-shutoff
The IPI Mk. II is delivered with the auto-shutoff active and set to
30 minutes. This feature can be reduced to 1 minute in 1 minute
increments. This can be completely turned off in cases where a
constant reading is necessary.
Serial communications
The IPI Mk. II has a serial port that is accessible though the
back of the case. This feature uses standard ASCII commands to allow for extraction of data from the IPI Mk. II while
taking readings. This requires the optional serial cable.
Hazardous location information / approvals
The standard in the European Union has been set
with the 9/94/EC Directive, commonly called ATEX
(“Atmosphères Explosibles,” French for explosive
atmospheres).
The JOFRA IPI Mk. II is ATEX approved by KEMA as complying with the Essential Health and Safety Requirements
related to the design and construction of equipment and
protective systems intended for use in potentially explosive atmospheres given in Annex II in the directive, and
with the following rating: II 3 G EEx nA IIB T6 (Ta=–10°C to
+55°C).
The IPI Mk. II is also certified by CSA as conforming to relevant Canadian and USA standards with
the following rating: Class 1, Div. 2, Groups A-D
See the definitions regarding hazardous locations in NFPA
70, Article 500 or CSA C22.1 Section 18. NFPA 70, Article
500 and CSA C22.1 Section 18.
Field recalibration
The IPI Mk. II does not need to be returned to the factory
for calibration. If you have a reliable and accurate pressure
reference or a local laboratory, you may recalibrate the
unit locally. This feature is password protected.
Sampling rate
The IPI Mk. II sampling rate is user selectable. If you want
to capture fast system transients, the unit can take a reading 10 times per second. Conversely, you may want to
conserve battery life and only need periodic samples. This
works well for in process and panel mounted applications.
You can also choose the accepted instrument sampling
rate of three samples per second.
Damping adjustment
The damping function can be turned on or off. This allows
for readings to be integrated, which accounts for momentary
changes such as those from pulsing sources.
Tare
Beyond zeroing the unit, you may have to account for
residual pressure. The Tare feature allows you to take care
of that error and prevent the manual calculation of the difference. This can be used in combination with the custom
engineering units to make the level measurements easier.
Temperature display and compensation
Because the IPI Mk. II is designed for in-process tasks, temperature compensation is included to make the job easier.
This allows the unit to maintain accuracy over the measurement range. The measured temperature may be checked from
the keypad.
2 www.jofra.com Industrial Pressure Indicator • IPI Mk. II
JOFRACAL
Calibration Software
JOFRACAL ensures easy calibration
of RTD´s, thermocouples, transmit-
ters, thermo switches, pressure
gauges and pressure switches. JOFRACAL can be used
with all JOFRA calibration instruments. When used with
ASM-800 signal multi scanner, JOFRACAL can perform a
simultaneous semi-automatic calibration on up to 24 pressure and/or temperature devices under test in any combination.
JOFRACAL software controls the complete calibration
procedure, stores the results and provides a calibration
audit trail through hard-copy certificates. All calibration
data is stored for each sensor to monitor drift and optimize
recalibration intervals. A scheduler feature allows planning
of future calibrations.
IPILOG
Data logging software (Order Number 128494)
IPILOG is a high-performance solution for pressure data
logging applications. Whether you need to log data from a
single IPI Mk.II or many, IPILOG is a cost-effective application that can handle all your needs.
Using the download mode allows a wide range of configuration settings, including:
• Multiple interval selection options from 1 sec to 1 hour
• Data logging runs can range from a few seconds to
several weeks
• Ambient temperature can be logged along with pressure for leak testing applications
• Four types of data capture mode allow you to log either
all data or only the points you’re interested in
o Continuous (log all data at predefined intervals)
o Data high (log data only when it rises above a preset
value)
o Data low (log data only when it falls below a preset value)
o Delta trip (for detecting noise or transients in the pressure
signal)
• Number of data points to record (maximum of 8500)
• Type of data .Interval end .Average .Minimum .Maximum .Median Average/Minimum/Maximum
When set to demand mode, you can easily set up and start
data logging in the field using the keypad. The IPI Mk. II is
very flexible and supports multiple data sets that can be
mixed between demand mode and download mode. Connection is done via a RS232 / USB converter and allows
IPILOG to retrieve the data and store it on your computer
in a variety of formats:
• Plain ASCII text (.TXT)
• Comma delimited text (.CSV)
• Microsoft™ Excel™ Spreadsheet (
• Microsoft Excel Spreadsheet with template formatting
(sample templates come with the IPILOG application
and you can create your own to meet your specific
requirements)
The data you get is reliable, accurate and easy to acquire
and manage for a variety of applications, for example:
• Hydrostatic pressure testing
• Leak detection
• Transient pressure spike detection
• Well head pressure monitoring
• District heating systems
• Gas distribution
• Fresh water supply
• Wastewater treatment
• And many others…
requires Excel 2002 or later)
IPILOG delivery (Order Number 128494):
• CD with IPILOG program
• Spreadsheet templates
• Drivers and manual.
• RS232 cable, and USB to RS232 converter
www.jofra.com 3IPI Mk. II • Industrial Pressure Indicator
Loading...