American Standard UL 1795 User Manual
EVOLUTION™ CORNER
Comfortable two person design with dual back
support positions, integral seat and installed grab
bar. Includes factory installed Safe-T-Heat
Whirlpool Heater.
❏ 6060V Whirlpool
• Acrylic with berglass reinforcement
• 2.1 HP self-draining pump/motor
• Ten ow adjustable jets including:
- Two adjustable Comfort Jets™ Hi Flo
- Eight adjustable Comfort Jets™
• Three silent air volume controls
• Side-mounted On/Off control
• Complete factory installed and tested
whirlpool system
• Pre-installed Safe-T-Heater Whirlpool Heater
EVOLUTION™
CORNER WHIRLPOOL
HIGH GLOSS
❏ 6060VC Whirlpool W/EverClean
®
System
• Same as above with the EverClean System
Nominal Dimensions:
1384 x 1384 x 546mm
(54-1/2" x 54-1/2" x 21-1/2")
Installed Size:
1949 x 1661 x 546mm
(76-3/4" x 65-3/8" x 21-1/2")
Compliance Certications Meets or Exceeds the Following Specications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
American Standard whirlpools with EverClean®
incorporate a patented silver-ion additive right
into the circulation piping to protect the pipes
from mold, mildew, algae and fungus that could
cause deterioration or staining of the pipes.
Components Required:
❏ Bath Filler*: (specify nish)
❏ Bath Drain: 1583.470 (specify nish)
Custom Accessories Available:
❏ Corner Apron: 0707.200 (specify color)
❏ Tile Bead Kit: 751755-100
* See American Standard Faucet Selector
For color/nish availability and other faucet choices, please
see the Product Selector and Pricing Guide.
NOTE: The Safe-T-Heater is designed to maintain water temperature during operation. It will not heat cold water to desired
bathing temperature.
SEE REVERSE FOR PRODUCT DIMENSIONS
AND SPECIFICATIONS
© 2008 AS America Inc.
H99
Revised 2/08
EVOLUTION™
8"
(203mm)
19-1/2"(C)
(495mm)
65-3/8"
(1661mm)
18"(A)
(457mm)
21-1/2"(H)
(546mm)
DIMENSIONS OF FIXTURES ARE NOMINAL AND MAY VARY WITHIN THE RANGE
OF TOLERANCES ESTABLISHED BY ANSI STANDARDS Z124.1 AND A112.19.7.
C/L OF
OVERFLOW
7"
(178mm)
76-3/4"
(1949mm)
54-1/2"
(1384mm)
65-3/8"
(1661mm)
3"
(76mm)
7"
(178mm)
15"
(381mm)
5-5/8"
(143mm)
17-3/4"
(451mm)
10"
(254mm)
13-3/4"
(349mm)
CUT OUT
IN FLOOR
FOR DRAIN
OUTLINE OF
CUTOUT
INST AL LE D SIZ E
WEIGHT
WEIGHT w /WATE R
GAL. T O OVERF LO W
WHIRLP OO L MIN . OPERATI NG VOL.
BATH IN G WELL AT SUMP
BATH IN G WELL AT RIM
WATER DE PTH T O OVERFLO W
FLOO R LO ADING
(PRO JE CT ED AR EA )
GENERA L SPE CIFIC ATIONS FOR 6060V WHIR LPOOL
WHIRLP OOL E LECTR ICAL SPECIFICATI ONS
PUMP
76-3 /4 x 65-3 /8 x 21-1 /2 In. (1 94 9 x 1 66 1 x 546 mm )
108 Lb s. (49 Kg .)
824 Lb s. (374 K g.)
86 G al . (325 L)
71 G al . (269 L)
48 x 2 6- 1/2 I n. (1219 x 673mm )
63 x 5 0 In. ( 16 00 x 12 70 mm)
15 I n. ( 381mm )
24 L bs ./ Sq.Ft . (116 Kg s. /Sq.m )
2. 1 HP , 14. 4 AMPS,12 0V .
E-Z IN ST ALL W HI RLPOOL HE ATER 12.0 A MP S,120 V.
CORNER WHIRLPOOL
HIGH GLOSS
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND OR PENINSULA T YPE INSTALLATION.
SUPPORT OF BATH BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED. SUPPORT AND ENCLOSING MATERIAL
BY OTHERS.
■ REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.
© 2008 AS America Inc.
OPTIONAL 2-WALL TILING BEAD KIT No.TILE-BEAD MUST BE ORDERED SEPARATELY.
▲ CUTOUT TEMPL ATE PROVIDED IN SHIPPING BOX. MAY BE REQUESTED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaet.
H100
Revised 2/08
Loading...