QUENTIN
™
TWO-HANDLE THERMOSTAT
WITH SEPARATE VOLUME CONTROL
MODEL NUMBER:
TRIM KITS:
T440.740 Quentin Two-Handle Thermostat Trim Kit
With separate volume control. LESS Valve.
ROUGH VALVES:
R520 Rough Valve Body only
C
OLD
HOT
196mm
(7-3/4")
1/2" NPT inlets/outlets. With separate volume control.
L
ESS Trim.
R540 Rough Valve Body only
3/4" NPT inlets/outlets. With separate volume control.
L
ESS Trim.
NOTE:
• When used as a Bath/Shower:
EITHER
- a separate diverter valve (such as R420 or R430)
OR
- a diverter tub spout (requires twin ell)
IS REQUIRED
R520
1/2" NPT
INLETS/OUTLETS
or
R540
186mm
(7-3/8")
100mm
(3-7/8")
242mm
C
O
T
L
O
D
H
(9-5/8")
3/4" NPT
INLETS/OUTLETS
65mm
(2-1/2")
25mm
NOTE: FITTING
(1")
MUST BE INSTALLED
WITH VOLUME CONTROL
ON TOP.
FINISHED WALL
48mm to 68mm
(2" to 2-5/8")
150mm
(6")
PRODUCT FEATURES:
Brass Casting: Highest quality faucet material for durability &
GENERAL DESCRIPTION:
Cast brass valve body. The single unit contains two
handles, the bottom lever handle sets the desired
temperature and the top lever handle functions as an
on/off, volume control. The temperature is maintained by
a wax element moving a shuttle valve between hot and
cold. The volume is controlled by twin ceramic disc valve
cartridges. Ceratherm includes Hot Limit Safety Stop.
Maximum temperature limit is 112°F. Escutcheon plate is
stamped brass.
and outlets.
mutiple outlet installations.
Available with 1/2" or 3/4" NPT inlets
The valve has a high flow rate, ideal for
long life.
Wax Thermostatic Unit: Permits shuttle valve to move
between the hot and cold seat to maintain the pre-selected
constant water temperature.
Back to Back Capable: Hot and cold can be reversed.
Spring-Loaded Check Valves: When the hot and cold water
enters the fitting, both supplies pass through the spring-loaded
check valves to prevent cross flow of hot and cold water.
Integrated Stop Valves: Ensure easy cleaning and servicing.
Adjustable Hot Limit Safety Stop: Limits the amount of hot
water allowed to mix with cold. Reduces the risk of accidental
scalding. Maximum water temperature limit may be reduced to
104 or 109 degrees Fahrenheit.
SUGGESTED SPECIFICATION:
Two handle Thermostat shall feature a cast brass valve body. Thermostat shall be a wax element shuttle valve. Shall also
feature ceramic disc valving, 1/2" NPT or 3/4" NPT inlets and outlets. Fitting shall be American Standard Model # T440.740.___
(Trim Kit) and R520 or R540 (Rough Valve).
© 2012 AS America Inc.
F15
3/12
QUENTIN
™
TWO-HANDLE THERMOSTAT
WITH SEPARATE VOLUME CONTROL
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ASSE 1016
ASME A112.18.1
CSA B125.1
Product
Number
T440.740
TRIM KITS**
Product
Number
Description
*
Two-handle Thermostat Trim Kit with separate volume control.
Description
FLOW RATE*
25
20
15
10
5
GALLONS PER MINUTE
0
INLET PRESSURE (PSI)
*Flow rates shown are for mixed hot and cold.
Finish Options
Polished
Chrome
002
Oil
Rubbed
Bronze
224
PVD
Satin
Nickel
3/4"
1/2"
80604020
295
BODIES
R520
ROUGH VALVE
R540
Rough Valve Body less trim - 1/2" NPT Inlets/Outlets
Rough Valve Body less trim - 3/4" NPT Inlets/Outlets
*NOTE: When used as a Bath/Shower a separate diverter valve is required (such as R420 or R430).
**
Requires twin ell (must be ordered separately) for use with diverter spouts.
ROUGH & TRIM MUST BE ORDERED SEPARATELY.
© 2012 AS America Inc.
F16
3/12