American Standard T506.740 User Manual

MOMENTS™

SUGGESTED SPECIFICATION:

Two handle Thermostat shall feature a cast brass valve body. Thermostat shall be a wax element shuttle valve. Shall also feature ceramic disc valving, 1/2" NPT or 3/4" NPT inlets and outlets. Fitting shall be American Standard Model # T506.740.___ (Trim Kit) and R520 or R540 (Rough Valve).

PRODUCT FEATURES:

Brass Casting: Highest quality faucet material for durability &

long life.

Wax Thermostatic Unit: Permits shuttle valve to move

between the hot and cold seat to maintain the pre-selected constant water temperature.

Back to Back Capable: Hot and cold can be reversed. Spring-Loaded Check Valves: When the hot and cold water

enters the fitting, both supplies pass through the spring-loaded check valves to prevent cross flow of hot and cold water.

Integrated Stop Valves: Ensure easy cleaning and servicing.

Adjustable Hot Limit Safety Stop: Limits the amount of hot

water allowed to mix with cold. Reduces the risk of accidental scalding. Maximum water temperature limit may be reduced to 104 or 109 degrees Fahrenheit.

MODEL NUMBER:

TRIM KITS: T506.740 Two-Handle Thermostat Trim Kit

With separate volume control. LESS Valve.

ROUGH VALVES: R520 Rough Valve Body only

1/2" NPT inlets/outlets. With separate volume control. LESS Trim.

R540 Rough Valve Body only

3/4" NPT inlets/outlets. With separate volume control. LESS Trim.

NOTE:

• When used as a Bath/Shower:

EITHER

- a separate diverter valve (such as R420 or R430) OR

- a diverter tub spout (requires twin ell - Model #8888.120) IS REQUIRED

GENERAL DESCRIPTION:

Cast brass valve body. The single unit contains two handles, the bottom lever handle sets the desired temperature and the top handle functions as an on/off, volume control. The temperature is maintained by a wax element moving a shuttle valve between hot and cold. The volume is controlled by twin ceramic disc valve cartridges. Ceratherm includes Hot Limit Safety Stop. Maximum temperature limit is 112°F. Escutcheon plate is stamped brass. Available with 1/2" or 3/4" NPT inlets

and outlets. The valve has a high flow rate, ideal for

mutiple outlet installations.

200mm

(7-5/8)

170mm

(6-5/8)

186mm

(7-3/8)

48mm to 68mm

(2 to 2-5/8)

25mm

(1)

155mm

(6-1/8)

FINISHED

WALL

100mm

(3-7/8)

R520

1/2" NPT INLETS

R540

3/4" NPT INLETS

TWO-HANDLE THERMOSTAT

WITH SEPARATE VOLUME CONTROL

F17

MOMENTS™

FLOW RATE*

GALLONS PER MINUTE

I N L E T P R E SS U R E (P S I )

*Flow rates shown are for mixed hot and cold.

12010080604020

CODES AND STANDARDS

These products meet or exceed the following codes and standards:

ASSE 1016 ASME A112.18.1 CSA B125

*NOTE: When used as a Bath/Shower a separate diverter valve is required (such as1660.430 or 1660.440).

Requires twin ell ( Model #8888.120 - must be ordered separately) for use with diverter spouts.

Two-handle Thermostat Trim Kit with separate volume control.

R540

Rough Valve Body less trim - 3/4" NPT Inlets/Outlets

R520

Rough Valve Body less trim - 1/2" NPT Inlets/Outlets

ROUGH & TRIM MUST BE ORDERED SEPARATELY.

T506.740

Product Number

Description

TRIM KITS**

Product Number

Description

ROUGH VALVE

BODIES

Meets the American Disabilities Act Guidelines and ANSI A117.1 Requirements for the physically challenged.

Finish Options

Polished

Chrome

002

PVD

Stainless

Steel

075

TWO-HANDLE THERMOSTAT

WITH SEPARATE VOLUME CONTROL

F18