American Standard T050.541 User Manual

150mm

(6)

NOTE: FITTING MUST BE INSTALLED WITH VOLUME CONTROL ON TOP.

SUGGESTED SPECIFICATION:

Two handle Thermostat shall feature a cast brass valve body. Thermostat shall be a wax element shuttle valve. Shall also feature ceramic disc valving, 1/2" NPT or 3/4" NPT inlets and outlets. Fitting shall be American Standard Model # T050.541.___ (Trim Kit) and R520 or R540 (Rough Valve Body).

PRODUCT FEATURES:

Brass Casting: Highest quality faucet material for durability &

long life.

Wax Thermostatic Unit: Permits shuttle valve to move

between the hot and cold seats to maintain the pre-selected constant water temperature.

Back to Back Capable: Hot and cold can be reversed. Spring-Loaded Check Valves:

When the hot and cold water

enters the fitting, both supplies pass through the spring-loaded check valves to prevent cross flow of hot and cold water.

Integrated Stop Valves: Ensure easy cleaning and servicing.

Adjustable Hot Limit Safety Stop: Limits the amount of hot

water allowed to mix with cold. Reduces the risk of accidental scalding. Maximum water temperature may be reduced to 104 or 109 degrees Fahrenheit.

150mm

(5-7/8)

220mm

(8-5/8)

TEMP

GENERAL DESCRIPTION:

Cast brass valve body. The single unit contains two handles, the lever handle sets the desired temperature and the metal cross handle functions as an on/off, volume control. The temperature is maintained by a wax element moving a shuttle valve between hot and cold. The volume is controlled by twin ceramic disc valve cartridges. Ceratherm includes Hot Limit Safety Stop. Maximum temperature limit is 112°F. Escutcheon plate is stamped brass. Available with 1/2" or 3/4" NPT inlets

and outlets.

The valve has a high flow rate, ideal for

mutiple outlet installations.

MODEL NUMBER:

TRIM KITS: T050.541 Two-Handle Classic Thermostat Valve Trim Kit

With separate volume control. LESS valve.

ROUGH VALVES: R520 Rough Valve Body only

1/2" NPT inlets/outlets. With separate volume control. L

ESS

Trim.

R540 Rough Valve Body only

3/4" NPT inlets/outlets. With separate volume control. L

ESS

Trim.

NOTE:

• When used as a Bath/Shower:

EITHER

- a separate diverter valve (such as R420 or R430) OR

- a diverter tub spout (requires twin ell - Model #8888.120) IS REQUIRED

R520

1/2" NPT INLETS

R540

3/4" NPT INLETS

186mm

(7-3/8)

100mm

(3-7/8)

48mm to 68mm

(2 to 2-5/8)

25mm

(1)

FINISHED

WALL

CERATHERM

TWO-HANDLE CLASSIC THERMOSTAT

WITH SEPARATE VOLUME CONTROL

CODES AND STANDARDS

These products meet or exceed the following codes and standards:

ASSE 1016 ASME A112.18.1 CSA B125

T050.541

Two-handle Thermostat Trim Kit with separate volume control.

R540

Rough Valve Body less trim - 3/4" NPT inlets/outlets.

R520

Rough Valve Body less trim - 1/2" NPT inlets/outlets.

NOTE: When used as a Bath/Shower a separate diverter valve is required (such as1660.430).

Requires twin ell ( Model #8888.120 - must be ordered separately) for use with diverter spouts. Use one discharge port only. Plug is provided.

FLOW RATE*

GALLONS PER MINUTE

I N L E T P R E S SU R E ( PS I )

*Flow rates shown are for mixed hot and cold.

12010080604020

ROUGH & TRIM MUST BE ORDERED SEPARATELY.

Finish Options

Product Number

Description

Polished

Chrome

002

PVD

Polished

Brass

099

PVD

Satin

Nickel

295

TRIM KITS**

Product Number

Description

ROUGH VALVE

BODIES

CERATHERM

TWO-HANDLE CLASSIC THERMOSTAT

WITH SEPARATE VOLUME CONTROL