INSTALLER
the end consumer. Please
.
It contains important care and
cleaning instructions as well
as warranty in
ormation.
Pr odu ct n ame s lis ted h er ein a re tr ade ma rks o f AS Am eri ca , Inc .
© AS A mer ic a, In c. 20 10
1
791127-401 Rev. Q
CARE AND CLEANING INSTRUCTIONS
Bathtub and Stan-Sure
General Cleaning of the Bathtub
This bathtub should be cleaned with hot soapy water using
a soft cloth or sponge. Liquid dishwashing detergents such
as Palmolive™ or Dawn™ work quite well. In areas
where the water is hard, a heavy duty liquid laundry
detergent such as Liquid Tide™ will work better.
DO NOT use any type of scouring pad or abrasive cleansers
on the sink., for example, 3M™ cleaning pads, Comet™,
Brillo™.
General Cleaning of the Stan-Sure
The American Standard Stan-Sure is a mixture of
porcelain and a very hard quartz that provides a safe slip
resistant surface. The Stan-Sure slip resistant surface is
designed to provide a built-in safety feature without
unsanitary mats and tapes. Because the surface may
accumulate soap and body oils, proper care and cleaning
maintenance is important.
We recommend the following cleaning and care instructions
for the Stan-Sure slip resistant surface.
Use powdered BonAmi™, Spic ‘N Span™ for best results
on stubborn stains on the Stan-Sure surface.
1).Wet tub surface
2).Sprinkle powdered cleaner onto a wet sponge.
3).Apply to the stain.
4).Rinse with water.
DO NOT use any type of scouring pad or abrasive cleansers
on the Stan-Sure surface and bathtub, for example, 3M ™
cleaning pads, Comet™, Brillo™.
2
791127-401 Rev. Q