American Standard 6060LC User Manual

LIFETIME™ CORNER

Comfortable two person design with dual back support positions, integral seat and installed grab bar.

❏ Model# 6060L (specify color)

• Acrylic with berglass reinforcement

• 2.1 HP self-draining pump/motor with dry run seal

• Ten ow adjustable jets including: Two adjustable Ideal Flow Comfort Jets™ Eight adjustable Comfort Jets™

• Three silent air volume controls

• Side-mounted On/Off control

• Complete factory installed and tested whirlpool system

• Includes E-Z-Install™ Whirlpool Heater

❏ Model# 6060LC (specify color)

• Same as above with the EverClean™ whirlpool system. The EverClean™ antimicrobial system incorporates AlphaSan®, a patented antimicrobial agent manufactured right into the circulation system components, which suppresses the growth of unsightly algae, fungus, mold and mildew.

Nominal Dimensions: 54-1/2” x 54-1/2” x 21-1/2” (1384 x 1384 x 546mm)

Installed Size: 76-3/4” x 65-3/8” x 21-1/2” (1949x 1661 x 546mm)

LIFETIME™ CORNER

WHIRLPOOLS BY AMERICAN STANDARD

HIGH GLOSS ACRYLIC

Components Needed:

❏ Bath Filler*: (specify nish) ❏ Bath Drain: 1583.470 (specify color)

OR 1599.500.020 (white only)

Custom Accessories Available:

❏ Corner Apron: CORNER-APRON (specify color) ❏ Tile Bead Kit: TILE-BEAD

* See American Standard Faucet Selector

Compliance Certications Meets or Exceeds the Following Specications:

• Underwriters Laboratories - Hydromassage Bathtubs UL 1795

• ASME A112.19.7M for Whirlpool Appliances

• ANSI Z124.1 for Plastic Bathtubs

• ASTM E162 for Flammability

• NFPA 258 for Smoke Density

SEE REVERSE FOR ROUGHING-IN DIMENSIONS AND PRODUCT SPECIFICATIONS

AlphaSan® is a registered trademark of Milliken & Co.

For color/nish availability and other faucet choices, please see the Product Selector and Pricing Guide.

NOTE: E-Z-Install™ Whirlpool Heater is designed to maintain water temperature during operation. It will not heat cold water to desired bathing temperature.

HD-1

Revised 7/07

LIFETIME™ CORNER

(178mm)

76-3/4"

(1949mm)

54-1/2"

(1384mm)

65-3/8"

(1661mm)

3" (76mm)

(178mm)

15"

(381mm)

(203mm)

17-3/4"

(451mm)

19-1/2"(C)

(495mm)

65-3/8"

(1661mm)

18"(A)

(457mm)

10"

(254mm)

13-3/4"

(349mm)

CUT OUT IN FLOOR

FOR DRAIN

21-1/2"(H)

(546mm)

DIMENSIONS OF FIXTURES ARE NOMINAL AND MAY VARY WITHIN THE RANGE OF TOLERANCES ESTABLISHED BY ANSI STANDARDS Z124.1 AND A112.19.7.

C/L OF

OVERFLOW

OUTLINE OF CUTOUT

INS TALLE D SI ZE WEI GHT WEI GHT w /W AT ER GAL . TO OV ER FLO W WHI RLPOO L MI N. OPERA TING VO L. BAT HING WE LL AT SUMP BAT HING WE LL AT RIM WAT ER DE PT H TO OVERF LOW FLO OR LO AD IN G (PR OJECT ED A REA )

GENERAL SPECI FICATIO NS FOR 6060L WHIRLP OOL

WHIRLPO OL ELE CTRICAL SPECI FICATIO NS

PUM P

76- 3/4 x 6 5- 3/8 x 21 -1/2 In . (19 49 x 1661 x 54 6mm )

108 Lbs. ( 49 Kg .)

824 Lbs. ( 37 4 K g.)

86 Gal. (3 25 L) 71 Gal. (2 69 L)

48 x 26- 1/ 2 In. (121 9 x 6 73 mm )

63 x 50 In . (16 00 x 1270m m)

15 In. ( 38 1m m)

24 Lbs./ Sq .F t. (116 Kgs./ Sq .m )

2 .1 HP , 14 .4 AMPS, 120V.

E-Z INST AL L WHI RLPOO L HEA TE R 12. 0 AMP S, 12 0V.

WHIRLPOOLS BY AMERICAN STANDARD

HIGH GLOSS ACRYLIC

NOTES:

BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND OR PENINSULA T YPE INSTALLATION. SUPPORT OF BATH BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED. SUPPORT AND ENCLOSING MATERIAL BY OTHERS.

■ REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.

OPTIONAL 2-WALL TILING BEAD KIT No.TILE-BEAD MUST BE ORDERED SEPARATELY.

▲ CUTOUT TEMPL ATE PROVIDED IN SHIPPING BOX. MAY BE REQUESTED SEPARATELY.

PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.

FITTINGS NOT INCLUDED, MUST BE ORDERED SEPARATELY.

IF INSTALLING A DECK-MOUNTED FITTING, BEFORE DRILLING ANY HOLES: CHECK FOR INTERFERENCE WITH CIRCULATING SYSTEM PIPING, DRAIN OVERFLOW, AND APRON INSTALLATION. MOUNTING HOLES DRILLED BY INSTALLER.

IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1 These measurements are subject to change or cancellation. No responsibilit y is assumed for use of superseded or voided leaet.

HD-2

Revised 7/07