American Standard 6060.028WC User Manual

CADENZA™ WHIRLPOOL

❏ 6060.028WC Whirlpool featuring System II

• Acrylic with berglass reinforcement

• EverClean® System

• Pre-leveled tub bottom

• Two person design with center drain and dual lumbar ends

• Molded-in seat

• Wave style grab bar

• 2.1 HP, two speed, self-draining pump/motor with pulse feature

• Factory installed power cord and plug

• Ten multi-directional and ow-adjustable jets including:

- Two Ideal-ow jets

- Six body massage jets

- Two recessed back-rest jets

• Deck-mounted electronic control with 20 minute built-in timed safety shut off and Chrome Bezel

• Three silent air volume controls

• Factory installed Safe-T-Heater™ Whirlpool Heater

• Factory installed and tested whirlpool system

Nominal Dimensions: 1384 x 1384 x 546mm (54-1/2" x 54-1/2" x 21-1/2")

Compliance Certications Meets or Exceeds the Following Specications:

• Underwriters Laboratories - Hydromassage Bathtubs UL 1795

• ASME A112.19.7M for Whirlpool Appliances

• ANSI Z124.1 for Plastic Bathtubs

• ASTM E162 for Flammability

• NFPA 258 for Smoke Density

CADENZA™

WHIRLPOOL

HIGH GLOSS

To Be Specied - Required:

❏ Color: ❏ Bath Filler: (specify nish) ❏ Bath Drain: 1583.470 (specify nish)

To Be Specied - Optional:

❏ Universal Tile Bead Kit: 751755-100 ❏ Corner Apron: 0707.200 (specify color) ❏ System II Control Bezel: 9861.100 (specify nish)

American Standard whirlpools and air baths with EverClean® incorporate a patented silver-ion additive right into the circulation piping to protect the pipes from mold, mildew, algae and fungus that could cause deterioration or staining of the pipes.

SEE REVERSE FOR PRODUCT DIMENSIONS AND SPECIFICATIONS

For color/nish availability and other faucet choices, please see the Product Selector and Pricing Guide.

* NOTE: Safe-T-Heater™ is designed to maintain water temperature during operation. It will not heat cold water to desired bathing temperature.

H39

Revised 2/08

1949mm

(76-3/4 REF.)

546mm (21-1/2)

ROUGH FLOOR

495mm (19-1/2)

1384mm

(54-1/2)

1605mm

(63-3/16)

975mm (38-3/8)

1661mm

(65-3/8)

346mm (13-5/8)

SEAT AREA

254mm

(10)

114mm

(4-1/2)

PROVIDE ACCESS TO PUMP FOR SERVICE

ON ALL INSTALLATIONS

NOTE: APRON ASSEMBLY WILL PROVIDE REQUIRED

ACCESS FOR SERVICING

51mm (2)

89mm

(3-1/2)

C/L OF OVERFLOW

LEVELING STRINGER NOT FOR SUPPORT

PUMP

178mm x 381mm (7 x 15) CUTOUT

C/L OF DRAIN

143mm

(5-5/8)

OUTLINE OF

CUTOUT

C/L

ON/ OFF SWIT CH

83mm

(3-1/4)

1-1/2 N.P.T. THREAD

1-1/2 O.D. TAILPIECE

38mm (1-1/2)

INTEGRAL FEET SUPPORT

RECOMMENDED FITTING LOCATION 64 X 381mm (2-1/2 X 15)

E-Z-Install™ HEATER

INS TA LL ED S IZ E WEI GH T WEI GH T w/ WA TE R GAL . TO O VE RF LO W WHI RL PO OL M IN . OPERA TI NG V OL . BAT HI NG W EL L AT SUMP BAT HI NG W EL L AT RIM WAT ER D EP TH T O OVERF LO W FLO OR L OA DI NG (PR OJ EC TE D AR EA ) PTS .

CUBE (FT3)

GENERA L SPECI FICATI ONS FO R 6060 WHIRL POOL

WHIRLP OOL ELE CTRICA L SPEC IFICAT IONS

SYS TE M II P UM P

76- 3/ 4 x 65 -3 /8 x 21 -1 /2 I n. ( 19 49 x 16 61 x 5 46 mm )

105 L bs . (4 8 Kg .)

822 L bs . (3 70 K g.)

86 Ga l. ( 32 6 L)

71 Ga l. ( 26 9 L) 45 x 40 I n. ( 11 43 x 10 16 mm ) 49 x 43 I n. ( 12 45 x 10 92 mm )

15- 3/ 8 In . (3 91 mm)

24 Lb s. /S q. Ft . (114 Kg s. /S q. m)

41. 7

68. 4

2 .1 H P, 1 5. 6 AMPS, 12 0V .

CADENZA™

WHIRLPOOL

HIGH GLOSS

NOTES:

BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND OR PENINSULA T YPE INSTALLATION. SUPPORT OF BATH BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED. SUPPORT AND ENCLOSING MATERIAL BY OTHERS.

■ REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.

OPTIONAL 2-WALL TILING BEAD KIT No.751755-100 MUST BE ORDERED SEPARATELY.

▲ CUTOUT TEMPL ATE PROVIDED IN SHIPPING BOX. MAY BE REQUESTED SEPARATELY.

PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.

● FITTINGS NOT INCLUDED, MUST BE ORDERED SEPARATELY.

● IF INSTALLING A DECK-MOUNTED FITTING, BEFORE DRILLING ANY HOLES: CHECK FOR INTERFERENCE WITH CIRCULATING

SYSTEM PIPING, DRAIN OVERFLOW, AND APRON INSTALLATION. MOUNTING HOLES DRILLED BY INSTALLER.

IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1 These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaet.

H40

Revised 2/08