M965327
MOUNTING
HOLES
4-1/4"
(108mm)
1-3/16"
(46mm)
5"
(126mm)
3-3/8"
(85mm)
3-3/16"
(33mm)
20"
(508mm)
1. Electronics Mixing Valve
and Enclosure
2. Supply Hoses
3. Mounting Kit
4. Installations instructions
All American Standard Faucets Are Water Tested At Our Factory.
Some Residual Water May Remain In The Faucet During Shipping.
Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years. To ensure
that your installation proceeds smoothly--please read these instructions carefully before you begin.
UNPACKING
1. Remove the Mixer and loose items from the carton. The picture below shows the Mixer and
all loose items after the carton has been opened.
1
TOOLS REQUIRED; Fig. 2
Fig. 2
Fig. 1
1 Channel Locks
2 Adjustable Wrench
3 Phillips Screwdriver
4 Flat Blade Screwdriver
5 Electric Drill & 1/4" Drill Bit
6 Tape Measure
1
2
3
4
5
6
Roughing-in Dimensions
10'
Thermostatic Mixing valve
• 3/8" stainless steel compression flex
hoses, 20" length
• Anti-scald protection
• Min. flow rate: 0.35 gpm
12
3
0
23 4 5 6 7
FLOW ( gpm)
FLOW CAPACITY
PRESSURE DROP (psi)
10
20
30
40
50
60
70
Installation InstructionsIn sta ll at ion I ns tru cti ons
(In Toronto Area only: 1-905-3061093)
SELECTRONIC™
Thermostatic Mixing Valve
Certified to comply with ASME A112.18.1M
© 2012 American Standard
M965327
To le a r n m o re ab o u t Am e r ic a n S t an d a rd Fa u ce t s v i si t o u r w e bs i t e a t: www.us.amstd.com or U.S.
customer's e-mail us at: faucetsupport@amstd.com
For Parts, Service, Warranty or other Assistance,
please call
1-800-442-1902 (In Canada: 1-800-387-0369)
NOTE TO INSTALLER: Please give this manual to the customer after installation.
(In Toronto Area only: 1-905-3061093)
605XTMV1070
Specications
Installation
Adjust Temperature
Service
Replacement Parts
1
2
3
3
4
4