American Standard 4147.100 User Manual

CULINAIRE™

MODEL NUMBER:

4147.100 Kitchen Faucet with Pull-Out Spray

Escutcheon plate (installation is optional).

PRODUCT FEATURES:

Ceramic Disc Valve Cartridge: Assures smooth, precise valve

control and a lifetime of drip-free, maintenance-free performance.

Brass and Copper Waterway: Highest quality materials for

durability & long life.

Memory Position Valving: Allows user to turn valve on and

off at preferred temperature setting without readjusting handle position each time.

Adjustable Hot Limit Safety Stop: Limits the amount of

hot water allowed to mix with cold. Reduces the risk of

accidental scalding.

Low Lead: Meets Prop 65 lead requirements. Pull-out Spray: Adjustable spray patterns - stream to spray. Larger Spout:

Increased height, reach and diameter.

Choice of Finishes:

Available in Polished Chrome and

Stainless Steel (PVD).

SUGGESTED SPECIFICATION:

Single control kitchen faucet shall feature a forged brass body with pull-out spray. Shall also feature washerless ceramic disc valve cartridge with integral hot limit safety stop. Fitting shall be American Standard Model # 4147.100.____

GENERAL DESCRIPTION:

Forged brass body with brass swivel spout and stamped brass escutcheon. Pull-out swivel spray spout. Nylon reinforced hose is 6ft long. Washerless 35mm ceramic disc valve cartridge with hot limit safety stop. 3/8" O.D. copper supplies with 1/2" male threaded adaptors and nuts. 2.2 gpm/8.3L/min. maximum flow rate. Fitting can be mounted with or without supplied escutcheon plate (escutcheon size 10-7/8"L x 2-1/2"W x 9/16"H). Faucet can be right or left hand mounted.

CODES AND STANDARDS

These products meet or exceed the following codes and standards:

ANSI A117.1 ASME A112.18.1 CSA B125 NSF 61 / Section 9

32mm

(1-1/4)

276mm (10-7/8)

241mm

(9-1/2)

334mm (13-1/8)

384mm (15-1/8)

278mm (10-7/8)

14mm

(1/2)

59mm

(2-3/8) max deck thickness

44mm (1-3/4)

Ø10mm

3/8

45˚

110mm

(4-5/16)

152mm

(6)

M33x1

SINGLE CONTROL KITCHEN FAUCET

WITH PULL-OUT SPRAY

4147.100

Hi flow faucet with pull out spray and hose. 3/8" copper inlets with 1/2" male threaded connectors and nuts.

CODES AND STANDARDS

These products meet or exceed the following codes and standards:

ANSI A117.1 ASME A112.18.1 CSA B125 NSF 61 / Section 9

FLOW RATE*

GALLONS PER MINUTE

I N L E T P R ES SU R E (P S I )

*Flow rates shown are for mixed hot and cold.

0.0

0.5

1.0

1.5

2.0

2.5

3.0

10080604020

Product Number

Description

Finish Options

075

Polished

Chrome

002

PVD

Stainless

Steel

Meets the American Disabilities Act Guidelines and ANSI A117.1 Requirements for the physically challenged.

CULINAIRE™

SINGLE CONTROL KITCHEN FAUCET

WITH PULL-OUT SPRAY