American Standard 4098.100 User Manual
GLENWALL™ PRESSURE-ASSISTED TOILET
14- 3/4
(37 5mm)
9
(22 9mm)
29-1/2
(749mm)
9
(229mm)
18- 1/2
(47 0mm)
C/L OF SEAT POST HOLES
5-1/2 (140mm CENTERS)
7-1/2
(191mm)
191 mm
(7- 1/2)
C/L OF WA STE
OUT LET
(4) 7/8
(22 mm) DI A. HO LES
SUP PLY AS
REQ UIRED
*
5/8
(16 mm)
3-1 /4
(83 mm)
1-1 /2
(38 mm)
5-1/4
(133mm)
3-7/8
(98mm)
FIN ISHED WALL
FIN.
FLOOR
3-1/4
(83mm)
3/4 (19mm)
REF.
6
(152mm)
8-1 /2
(21 6mm)
19-1 /2
(495 mm)
3/4 ± 1/4
(19m m ± 6m m)
C/L
30
(762mm)
OR
32
(813mm)
14- 1/2
(36 8mm)
OR
16- 1/2
(41 9mm)
4-1/8
(105mm)
OR
6-1/8
(156mm)
When installed so top of seat is 432 to 483mm (17" to 19") from the
finished floor.
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND
ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USEABLE
BUILDING FACILITIES-CHECK LOCAL CODES.
BARRIER FREE
❏ 2093.100
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• Wall-mounted, back-outlet toilet
• Elongated bowl
• Fully-glazed 2" ballpass trapway
• 10" x 12" water surface area
• Pressure-assisted siphon jet action
• Side-mounted chrome trip lever
• Close-coupled ushometer tank*
• Speed Connect® tank/bowl coupling system
• Sanitary bar on bowl
❏ 3402.016 Elongated bowl
❏ 4098.100 Tank complete with coupling
components
Nominal Dimensions:
749 x 495 x 762 mm
(29-1/2" x 19-1/2" x 30")
Fixture only, seat and supply by others
GLENWALL™ PRESSURE-ASSISTED
WALL-MOUNTED TOILET
VITREOUS CHINA
Required working pressure range 25 psi - 80 psi
Alternate Congurations Available:
❏ 4098.700 Tank and tank cover only
with tank cover locking device
❏ 4098.800 Tank and tank cover only
with right hand trip lever
Compliance Certications Meets or Exceeds the Following Specications:
• ASME A112.19.2 for Vitreous China Fixtures
To Be Specied:
❏ Color: ❏ White ❏ Bone ❏ Linen
❏ Silver ❏ Fawn Beige ❏ Black
❏ Seat: American Standard #5324.019 “Rise and
Shine” (with easy to clean lift-off hinge system)
solid plastic closed front seat with cover.
❏ Seat: American Standard #5311.012 “Laurel”
molded closed front seat with cover.
❏ Alternate Seat:
❏ Supply with Stop:
* Flushmate III tank system by Flushmate® Div. of Sloan Valve Co
© 2008 AS America Inc.
NOTES:
WASTE OUTLET SEAL RING MUST BE NEOPRENE OR GRAPHITEFELT (WAX RING NOT RECOMMENDED)
SUGGEST 1/16" CLEARANCE BETWEEN FACE AT WALL AND BACK OF
BOWL.
CARRIER FITTING AS REQUIRED TO BE FIGURED AND FURNISHED BY
OTHERS.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
SUPPLY NOT INCLUDED WITH FIX TURE AND MUST BE ORDERED
SEPARATELY.
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
*
FOR ADDITIONAL INFORMATION REFER TO INSTALLATION
INSTRUCTIONS SUPPLIED.
IMPORTANT: Dimensions of xtures are nominal and may vary within
the range of tolerances established by ANSI Standard A112.19.2. These
measurements are subject to change or cancellation. No responsibilit y is
assumed for use of superseded or voided pages.
M44
Revised 2/08
Loading...