American Standard 2648.016, 4096.016 User Manual
RAVENNA™ ROUND FRONT TOILET
❑ 2648.016
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• Round front siphon action jetted bowl
• Fully glazed 2" trapway
• AquaForce ushing technology
• D-shaped style tank with tted tank cover
• Chrome trip lever
• Speed Connect™ tank/bowl coupling system
• Sanitary bar on bowl
• 2 color matched bolt caps
• 100% factory ush tested
• Design coordinated to Ravenna
pedestal lavatory
❑ 3454.016 Bowl
❑ 4096.016 Tan k
Alternate Tank:
❑ 4096.516 with Aquaguard tank liner
Nominal Dimensions:
699 x 476 x 737mm
(27-1/2" x 18-3/4" x 29")
Fixture only, seat and supply by others
Compliance Certi cations Meets or Exceeds the Following Speci cations:
• ASME A112.19.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimension
83mm
(3-1/4)
FINISHED WALL
19mm ± 6mm
(3/4 ± 1/4)
178mm
(7)
RAVENNA™
ROUND FRONT TOILET
VITREOUS CHINA
699mm
(27-1/2)
476mm
222mm
(8-3/4)
419mm
(16-1/2)
C/L OF SEAT POST HOLES
140mm (5-1/2 CENTERS)
16mm
(5/8)
305mm
(12)
381mm
(15)
FINISHED
FLOOR
SUPPLY
AS
REQ'D
222mm
*
(8-3/4)
152mm
(18-3/4)
C/L
381mm
(15)
(6)
241mm
(9-1/2)
737mm
(29)
To Be Speci ed:
❏ Color:
❏ Seat: American Standard #5322.011 “Rise and
Shine" solid plastic, closed front, round front seat
with cover.
❏ Seat: American Standard #5308.014 “Laurel"
molded closed front seat with cover.
❏ Alternate Seat:
❏ Supply with stop:
© 2006 American Standard Inc.
305mm
(12)
NOTES:
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION
OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
*
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range
of tolerance established by ANSI Standard A112.19.2
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
K64
C/L OF OUTLET
Revised 5/05
Loading...