American Standard 4021.128, 3 FloWise 2829.128, 3 FloWise 3011.128 User Manual

CADET® 3 FloWise® ROUND FRONT TOILET

Certiﬁed by

IAPMO R&T

❑ 2829.128

• Vitreous china

• Meets denition for HET (High Efciency Toilet)

• High efciency (4.8 Lpf/1.28 gpf)

• Certied in EPA Water Sense Program

• Qualies in LEEDS Program

• EverClean stain- and odor-causing bacteria, mold, and mildew on the surface

• Featuring the

• Elongated siphon action jetted bowl

• Fully-glazed 2-1/8" trapway

• Generous 9" x 8" water surface area

• Close-coupled tank with at tank cover for superior storage

• Oversized 3" ush valve with chemical resistant apper

• Chrome trip lever

• Speed Connect

• Sanitary dam on bowl with four point tank stabilization

• 2 color-matched bolt caps

• 100% factory ush tested

• 5 year warranty

surface inhibits the growth of

Cadet® 3 Flushing System

tank-to-bowl coupling system

CADET® 3 FloWise

ROUND FRONT TOILET

VITREOUS CHINA

❑ 3011.128 Round Front Bowl ❑ 4021.128 Tank

Nominal Dimensions: 718 x 438 x 733mm (28-1/4" x 17-1/4" x 28-7/8")

Fixture only, seat and supply by others

Alternative Tank Congurations Available:

❑ 4021.513 Tank complete with Aquaguard Liner ❑ 4021.613 Tank complete with tank cover

locking device ❑ 4021.713 Tank complete with Aquaguard Liner and tank cover locking device ❑ 4021.813 Tank complete with trip lever located on right side ❑ 4021.913 Tank complete with tank cover locking device and trip lever located on right side ❑ 4021.953 Tank complete with Aquaguard Liner, tank cover locking device and trip lever located

on right side

Compliance Certications Meets or Exceeds the Following Specications:

• ASME A112.19.2M for Vitreous China Fixtures includes Flush Performance, Trap Seal Depth

and all Dimensions

• Los Angeles Department of Water and Power Supplementary Purchase Specication for Non-Adjustability

• Certied in EPA WaterSense HET program

SEE REVERSE FOR ADDITIONAL ROUGHING-IN DIMENSIONS

To Be Specied:

❏ Color: ❏ White ❏ Bone ❏ Silver ❏ Linen ❏ Black ❏ Seat: #5330.010 Round front Champion® Slow Close

solid plastic seat and cover with easy lift off feature ❏ Seat: #5284.016 Elongated EverClean® solid plastic

seat and cover

❏ Seat: #5320.110 EverClean® Right Front Seat with

Slow Close Snap-Off Hinges

❏ Supply with stop:

NOTES:

THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET. SUPPLY NOT INCLUDED WITH FIX TURE AND MUST BE ORDERED SEPARATELY.

DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to c hange or cancellation. No responsibility is assumed for use of superseded or voided pages.

K79

Revised 2/08

FINISHED WALL

FINISHED FLOOR

C/L OF OUTLET

SUPPLY

REQ'D.

216mm

(8-1/2)

718mm (28-1/4)

25mm ± 6mm (1 ± 1/4)

102mm

(4)

416mm (16-3/8)

438mm (17-1/4)

733mm (28-7/8)

*381mm

(15)

*203mm

(8)

305mm

(12)

333mm (13-1/8)

216mm

(8-1/2)

C/L OF SEAT POST HOLES 140mm (5-1/2 CENTERS)

352mm (13-7/8)

*152mm (6)

235mm

(9-1/4)