American Standard 3797.016, 4707.016, 2797.016 User Manual

TOWN SQUARE® RIGHT HEIGHT™

483 mm

(19 )

C/L OF SEA T POST

MTG HO LES ON

140 mm (5-1 /2) CT RS

429 mm

(16 -7/ 8)

152 mm (6)

381 mm (15)

273 mm

(10 -3/ 4)

857 mm

(33 -3/ 4)

C/L OF SUP PLY

AS REQ UIRE D

FIN ISH ED

FLO OR

13m m ( 1/2)

89m m ( 3-1/ 2)

305 mm

(12 )

508 mm

(20 )

* 15 2mm (6)

* 203mm

(8)

C/L OF OUT LET AN D TOI LET MTG BOLTS

743 mm

(29 -1/ 4)

203 mm

(8)

25 ± 6 mm ( 1 ± 1/ 4)

FIN ISH ED W ALL

C/L

391 mm (15 -3/ 8)

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE BUILDING FACILITIES-CHECK LOCAL CODES.

ELONGATED TOILET

❑ 2797.016

• Vitreous china

• Low-consumption (6.0 Lpf/1.6 gpf)

• Elongated siphon action jetted bowl with 2" trapway

• AquaForce ushing technology

• 16-1/2" Rim height for accessible applications

• American classic styling on bowl and tank design matched to pedestal and countertop lavatories

• Front-mounted chrome trip lever design matched to Town Square faucets

• Design matched molded elongated Town Square seat and cover (5725.027) included

• 2 bolt caps

• Internal trapway area fully glazed

• 100% factory ush tested

TOWN SQUARE®

RIGHT HEIGHT™ ELONGATED TOILET

VITREOUS CHINA

❑ 3797.016 Bowl ❑ 4707.016 Tank

Nominal Dimensions: 743 x 508 x 857mm (29-1/4" x 20" x 33-3/4")

Fixture and seat only, supply by others

Compliance Certications Meets or Exceeds the Following Specications:

• ASME A112.19.2M for Vitreous China Fixtures - includes Flush Performance, Ball Pass Diameter, Trap Seal Depth and all Dimensions

To Be Specied:

❏ Color: ❏ White ❏ Bone ❏ Silver ❏ Linen ❏ Black ❏ Alternate Seat: ❏ Supply with stop:

NOTES:

THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.

DIMENSIONS SHOWN FOR LOCATION OF SUPPLY ARE SUGGESTED.

SUPPLY NOT INCLUDED WITH FIX TURE AND MUST BE ORDERED SEPARATELY.

IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerance established by ANSI Standard A112.19.2. These measurements are subject to c hange or cancellation. No responsibility is assumed for use of superseded or voided pages.

K45

Revised 2/08