American Standard 3420.001, 3420.803, 3420.403 User Manual
AFFINITY™ COUNTERTOP SINK
10m m
(3/ 8)
FIN IS HED W AL L
OR SP LASHB AC K
OPT IO NAL
197 mm
(7- 3/ 4)
70m m
(2- 3/ 4)
445 mm
(17 -1 /2)
527 mm
(20 -3 /4)
203 mm
(8)
210 mm
(8- 1/ 4)
*
356 mm
(14 )
203 mm
(8)
1-1 /4 O.D. W AS TE
SUP PL IES
AS RE Q'D
*2 76 mm
(10 -7 /8)
COU NT ERTOP
(BY O THERS )
787 mm
(31 ) TO
FIN IS HED
FLO OR
FIN IS HED F LO OR
178 mm
(7)
1-1 /4 O.D. T AI LPI EC E
SEA LI NG
COM PO UND
Americast® Brand Engineered Material
• Acid-resistant porcelain nish
• Large bowl area
• Self-rimming with cutout template supplied
• Chrome overow trim ring
• Shown with 8871.802 Lexington spread faucet
with Fabian handles (not included)
❏ 3420.001 Center hole only
❏ 3420.403 Faucet holes on 4" (102mm) centers
❏ 3420.803 Faucet holes on 8" (203mm) centers
(illustrated)
Nominal Dimensions:
527 x 445mm
(20-3/4" x 17-1/2")
Bowl sizes:
483mm (19") wide
292mm (11-1/2") front to back
178mm (7") deep
AFFINITY™
COUNTERTOP SINK
AMERICAST® BRAND ENGINEERED MATERIAL
Americast® Brand engineered material is a
composition of porcelain bonded to enameling grade
metal, bonded to a patented structural composite.
Compliance Certications Meets or Exceeds the Following Specications:
• ASME A112.19.4M for Americast Plumbing Fixtures
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
To Be Specied:
❏ Color: ❏ White ❏ Bone ❏ Linen
❏ Silver ❏ Fawn Beige ❏ Black
❏ Faucet*:
❏ Faucet Finish:
❏ Optional Trim Ring for Overow:
790730-101 Polished Brass
❏ Supplies:
❏ Trap:
* See faucet section for additional models available
© 2008 AS America Inc.
NOTES:
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TR AP ARE
*
SUGGESTED.
FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE
TEMPLATE SUPPLIED WITH SINK.
FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
SEALING COMPOUND SUPPLIED BY OTHERS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range of
tolerances established by ANSI Standard A112.19.4.
These measurements are subject to c hange or cancellation. No responsibility is
assumed for use of superseded or voided leaet.
J56
Revised 2/08
Loading...