ACCLIVITY™ COUNTERTOP SINK
1-1 /4 O .D .
TAI LP IE CE
1-1 /4 O .D .
WAS TE
FIN IS HE D WALL
OR SP LA SH BACK
OPT IO NA L
102 mm
(4)
C/L
241 mm
(9- 1/ 2)
79m m
(3- 1/ 8)
483 mm
(19 )
COU NT ER TO P
(BY O TH ER S)
787 mm
(31 )
SUG GE ST ED
FIN IS HE D
FLO OR
210 mm
(8- 1/ 4)
*2 60 mm
(10 -1 /4 )
SEA LI NG
COM PO UN D
*3 56 mm
(14 )
203 mm
(8)
178 mm
(7)
SUP PL IE S
AS RE Q' D
10m m
(3/ 8)
Americast® Brand Engineered Material
• Acid-resistant porcelain nish
• Large bowl area
• Self-rimming with cutout template supplied
• Chrome overow trim ring
• Shown with lavatory faucet (not included)
❏ 3409.001 Center hole only
❏ 3409.403 Faucet holes on 4" (102mm) centers
(illustrated)
❏ 3409.803 Faucet holes on 8" (203mm) centers
Nominal Dimensions:
483mm dia. (19") Round
Bowl sizes:
368mm (14-1/2") wide
302mm (11-7/8") front to back
178mm (7") deep
ACCLIVITY™
COUNTERTOP SINK
AMERICAST® BRAND ENGINEERED MATERIAL
Americast® Brand engineered material is a
composition of porcelain bonded to enameling grade
metal, bonded to a patented structural composite.
Compliance Certications Meets or Exceeds the Following Specications:
• ASME A112.19.4M for Americast Plumbing Fixtures
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
To Be Specied:
❏ Color: ❏ White ❏ Bone ❏ Linen
❏ Silver ❏ Fawn Beige ❏ Black
❏ Faucet*:
❏ Faucet Finish:
❏ Optional Trim Ring for Overow:
790730-101 Polished Brass
❏ Supplies:
❏ Trap:
* See faucet section for additional models available
© 2008 AS America Inc.
NOTES:
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TR AP ARE
*
SUGGESTED.
FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE
TEMPLATE SUPPLIED WITH SINK.
FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
SEALING COMPOUND SUPPLIED BY OTHERS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range
of tolerances established by ANSI Standard A112.19.4.
These measurements are subject to c hange or cancellation. No responsibility is
assumed for use of superseded or voided leaet.
J57
Revised 2/08