American Standard 3 4019.800, 3 4019.900, 3 4019.600, 3 2384.010 User Manual

CADET® 3 ROUND FRONT 10" ROUGH-IN TOILET

❑ 2384.010

• Vitreous china

• Low-consumption (6.0 Lpf/1.6 gpf)

• EverClean® surface inhibits the growth of stain- and odor-causing bacteria, mold, and mildew on the surface

• Features the Cadet® 3 Flushing System

• Space saving round front siphon action

jetted bowl

• Fully-glazed 2-1/8" trapway with 2" ball pass

• Generous 9" x 8" water surface area

• Close-coupled tank with at tank cover for

superior storage

• Oversized 3" ush valve with chemical

resistant apper

• Chrome trip lever

• Speed Connect® tank-to-bowl

coupling system

• Sanitary dam on bowl with four point

tank stabilization

• 2 color-matched bolt caps

• 100% factory ush tested

• 5 year warranty

CADET® 3 ROUND FRONT 10"

ROUGH-IN TOILET

VITREOUS CHINA

SEE REVERSE FOR ADDITIONAL ROUGHING-IN DIMENSIONS

❑ 3011.016 Round Front Bowl ❑ 4019.016 Tank

Nominal Dimensions: 667 x 432 x 740mm (26-1/4" x 17" x 29-1/8")

Fixture only, seat and supply by others

Alternative Tank Congurations Available:

❑ 4019.600 Tank complete with tank cover

locking device

❑ 4019.800 Tank complete with trip lever

on right side

❑ 4019.900 Tank complete with tank cover

locking device and trip lever on right side

Compliance Certications Meets or Exceeds the Following Specications:

• ASME A112.19.2M for Vitreous China Fixtures includes Flush Performance, Ball Pass Diameter, Trap Seal Depth and all Dimensions

• Los Angeles Department of Water and Power Supplementary Purchase Specication for Non-Adjustability

To Be Specied:

❏ Color: ❏ White ❏ Bone ❏ Silver ❏ Linen ❏ Black ❏ Seat: #5330.010 Round front Champion® Slow Close

solid plastic seat and cover with easy lift off feature ❏ Seat: #5282.011 Round Front EverClean® solid plas-

tic seat and cover

❏ Seat: #5320.110 EverClean® Round Front Seat with

Slow Close Snap-Off Hinges

❏ Supply with stop:

NOTES:

THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 254MM (10") FROM FINISHED WALL TO C/L OF OUTLET. SUPPLY NOT INCLUDED WITH FIX TURE AND MUST BE ORDERED SEPARATELY.

DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

IMPORTANT: Dimensions of xtures are nominal and may var y within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

K69

Revised 2/08

FINISHED WALL

FINISHED FLOOR

C/L OF OUTLET

SUPPLY

REQ'D.

184mm

(7-1/4)

667mm (26-1/4)

19mm ± 6mm (3/4 ± 1/4)

64mm

(2-1/2)

416mm (16-3/8)

432mm

(17)

740mm (29-1/8)

*381mm

(15)

*203mm

(8)

254mm

(10)

337mm (13-1/4)

216mm

(8-1/2)

C/L OF SEAT POST HOLES 140mm (5-1/2 CENTERS)

356mm

(14)

*152mm (6)

244mm

(9-5/8)