American Standard 2388.010, 4310.016, 3338.012 User Manual

254m m

(10)

660m m

(26)

C/L OF OUT LET

79mm

(3-1 /8)

FINI SHED W ALL

184m m (7-1 /4)

19mm ± 6mm (3/4 ± 1/4 )

381m m

(15)

419m m

(16- 1/2)

C/L

C/L OF SEA T POST HOLES 140m m (5-1 /2 CEN TERS)

308m m

(12- 1/8)

159mm

(6-1/4)

16mm

(5/8 )

FINI SHED FLOO R

743m m

(29- 1/4)

235m m

(9-1 /4)

152m m

(6)

508m m

(20)

203m m

(8)

SUPP LY

REQ' D

365m m (14- 3/8)

COLONY™ ROUND FRONT 10" ROUGH-IN TOILET

❑ 2388.010

• Vitreous china

• Low-consumption (6.0 Lpf/1.6 gpf)

• 10" roughing-in

• Round front siphon action jetted bowl

• Fully glazed 2" trapway

• American Standard Aquameter™ Water Control

• Color-matched trip lever

• Sanitary bar on bowl

• 2 bolt caps

• 100% factory ush tested

❑ 3338.012 Bowl ❑ 4310.016 Tank

Nominal Dimensions: 660 x 508 x 743mm (26" x 20" x 29-1/4")

COLONY™

ROUND FRONT 10" ROUGH-IN TOILET

VITREOUS CHINA

Fixture only, seat and supply by others

Compliance Certications Meets or Exceeds the Following Specications:

• ASME A112.19.2M for Vitreous China Fixtures includes Flush Performance, Ball Pass Diameter, Trap Seal Depth and all Dimensions

To Be Specied:

❏ Color: ❏ White ❏ Bone ❏ Linen ❏ Seat: American Standard #5322.011 “Rise and

Shine” solid plastic closed front seat with cover. ❏ Seat: American Standard #5308.014 “Laurel” molded closed front seat with cover.

❏ Alternate Seat: ❏ Supply with stop:

NOTES:

THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 254MM (10") FROM FINISHED WALL TO C/L OF OUTLET.

DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

SUPPLY NOT INCLUDED WITH FIX TURE AND MUST BE ORDERED SEPARATELY.

IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerance established by ANSI Standard A112.19.2 These measurements are subject to c hange or cancellation. No responsibility is assumed for use of superseded or voided pages.

K97

Revised 2/08