![](/html/9a/9ada/9ada0db3726a2cacc6e944cf4f35cf1244a67d887829fb5ef74b40868b684c29/bg1.png)
RETROSPECT® COLLECTION ELONGATED
*
*
494mm
(19-7/16")
C/L OF SEA T POST
MTG HOLES ON
140m m (5-1 /2") CT RS
168 mm (6- 5/8")
389 mm (15 -5/16")
273m m
(11- 5/8")
838m m
(33" )
425m m
(16- 3/4")
C/L OF SUP PLY
AS R EQUIRE D
FINI SHED
FLOO R
13m m (1/2 ")
90m m
(3-9 /16")
305m m
(12" )
486mm
(19-1/8")
152 mm (6" )
203mm
(8")
C/L OF OUT LET AND
TOIL ET MTG BOLTS
768mm
(30-1/4")
214m m
(8-7 /16")
25 ± 6mm (1 ± 1/4")
400mm
(15-3/4")
FINI SHED W ALL
C/L
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND
ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE
BUILDING FACILITIES-CHECK LOCAL CODES.
RIGHT HEIGHT™ TOILET
❑ 2405.016
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• Elongated siphon action jetted bowl with fully
glazed 2" trapway
• 16-3/4" rim height for accessible application
• AquaForce ushing technology
• Antique Chrome trip lever
• Sanitary bar on bowl
• 2 color matched bolt caps
• 100% factory ush tested
• Design coordinated to Retrospect
Collection Sinks
❑ 3264.216 Bowl
❑ 4393.016 Tank
RETROSPECT® COLLECTION
RIGHT HEIGHT™ ELONGATED TOILET
VITREOUS CHINA
Nominal Dimensions:
768 x 486 x 838mm
(30-1/4" x 19-1/8" x 33")
Fixture only, seat and supply by others
Compliance Certications Meets or Exceeds the Following Specications:
• ASME A112.19.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimension
To Be Specied:
❏ Color: ❏ White
❏ Seat: American Standard #5324.019 “Rise and
Shine” solid plastic closed front, elongated seat
with cover.
❏ Alternate Seat: American Standard #5311.012
“Laurel” molded closed front seat with cover.
❏ Supply with stop:
NOTES:
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION
OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
*
SUPPLY NOT INCLUDED WITH FIX TURE AND MUST BE ORDERED
SEPARATELY.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range
of tolerance established by ANSI Standard A112.19.2
These measurements are subject to c hange or cancellation. No responsibility is
assumed for use of superseded or voided pages
© 2008 AS America Inc.
K48
Revised 2/08