American Standard 3111.216, 4393.016 User Manual

RETROSPECT® COLLECTION ROUND FRONT TOILET

❑ 2408.016

• Vitreous china

• Low-consumption (6.0 Lpf/1.6 gpf)

• Round front siphon action jetted bowl with fully glazed 2" trapway

• AquaForce  ushing technology

• Antique Chrome trip lever

• Sanitary bar on bowl

• 2 color matched bolt caps

• 100% factory  ush tested

• Design coordinated to Retrospect Collection Sinks

❑ 3111.216 Bowl ❑ 4393.016 Tank

RETROSPECT® COLLECTION

ROUND FRONT TOILET

VITREOUS CHINA

Nominal Dimensions:

768 x 486 x 794mm (30-1/4" x 19-1/8" x 31-1/4")

Fixture only, seat and supply by others

Compliance Certi cations Meets or Exceeds the Following Speci cations:

• ASME A112.19.2M for Vitreous China Fixtures - includes Flush Performance, Ball Pass Diameter, Trap Seal Depth and all Dimensions

90mm

(3-9/16")

To Be Speci ed:

❏ Color: ❏ Seat: American Standard #5322.011 “Rise and

Shine" solid plastic, closed front, round front seat with cover. ❏ Alternate Seat: American Standard #5308.014 “Laurel" molded closed front seat with cover. ❏ Supply with stop:

FINISHED WALL

768mm

± 6mm

25mm (1 ± 1/4)

13mm

(1/2)

305mm

(12)

NOTES:

THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.

DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.

IMPORTANT: Dimensions of  xtures are nominal and may vary within the range of tolerance established by ANSI Standard A112.19.2 These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

(30-1/4)

216mm (8-1/2")

C/L OF SEAT POST HOLES 140mm (5-1/2) CENTERS

444mm

(17-1/2)

344mm (13-9/16)

159mm

(6-1/4)

C/L OF OUTLET

381mm

(15)

406mm

(16)

SUPPLY AS

REQUIRED

222mm

(8-3/4)

152mm

FINISHED FLOOR

486mm

(19-1/8)

C/L

794mm

(31-1/4)

(6)

279mm

(11)

K41

Revised 5/05