American Standard 3111.016 User Manual
REMINISCENCE™ ROUND FRONT TOILET
❑ 2311.016
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• Round front siphon action jetted bowl with
2" trapway
• Bowl rim height at 381mm (15")
• AquaForce ushing technology
• Vintage detailing on bowl and tank–design
matched to pedestal and countertop lavatories
• Side-mounted antique styled chrome trip lever
with ceramic handle insert
• 2 bolt caps
• Internal trapway area fully glazed
• 100% factory ush tested
❑ 3111.016 Bowl
❑ 4111. 016 Tank
REMINISCENCE™
ROUND FRONT TOILET
VITREOUS CHINA
Shown with 5308.014 “Laurel" seat
Nominal Dimensions:
718 x 508 x 826mm
(28-1/4" x 20" x 32-1/2")
Fixture only, seat and supply by others
Compliance Certi cations Meets or Exceeds the Following Speci cations:
• ASME A112.19.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
To Be Speci ed:
❏ Color:
❏ Seat: American Standard #5322.011 “Rise and
Shine" solid plastic closed front seat with cover.
❏ Alternate Seat: American Standard #5308.014
“Laurel" molded closed front seat with cover.
❏ Supply with stop:
FINISHED WALL
718mm
25mm ± 6mm
(1 ± 1/4)
76mm
(3)
13mm
(1/2)
305mm
(12)
NOTES:
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION
OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
DIMENSIONS SHOWN FOR LOCATION OF SUPPLY ARE SUGGESTED.
*
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range
of tolerance established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
(28-1/4)
229mm
(9)
C/L OF SEAT POST HOLES
(140mm CENTERS)
(5-1/2)
425mm
(16-3/4)
343mm
(13-1/2)
159mm
(6-1/4)
C/L OF OUTLET
381mm
(15)
406mm
(16)
SUPPLY AS
REQUIRED
*222mm
*
FINISHED
FLOOR
(8-3/4)
140mm
(5-1/2)
508mm
(20)
C/L
279mm
(11)
826mm
(32-1/2)
© 2006 American Standard Inc.
K34
Revised 5/05
Loading...