American Standard 2738.014, 3101.016 User Manual

OAKMONT CHAMPION® 4

419m m

(16- 1/2)

FINI SHED FLOO R

305m m

(12)

772m m

(30- 3/8)

C/L OF OUT LET

83mm

(3-1 /4)

470m m

(18- 1/2)

C/L OF SEA T POST HOLES 140m m (5-1 /2 CEN TERS)

384m m

(15- 1/8)

275mm

(10-13/16)

16mm

(5/8 )

872m m

(34- 5/16)

492m m

(19- 3/8)

SUPP LY

REQ' D

295m m

(11- 5/8)

*15 2mm

(6)

*25 4mm

(10)

356m m

(14)

FINI SHED W ALL

32mm ± 6mm (1-1 /4 ± 1 /4)

216m m (8-1 /2)

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE BUILDING FACILITIES-CHECK LOCAL CODES.

ELONGATED RIGHT HEIGHT™ TOILET

❑ 2738.014

• Vitreous china

• EverClean® surface inhibits the growth of stain- and odor-causing bacteria, mold,

and mildew on the surface

• Low-consumption (6.0 Lpf/1.6 gpf)

• Features Champion® 4 Flushing System performance platform

• 4" non-adjustable, piston action Accelerator™

ush valve

• 16-1/2" rim height for accessible applications

• Elongated siphon action jetted bowl

• 2-3/8" fully-glazed trapway

• Speed Connect® tank/bowl coupling system

• Chrome-plated trip lever

• Sweeping pier on bowl

• 100% factory ush tested

• 2 bolt caps

• 10 year warranty

OAKMONT CHAMPION® 4

ELONGATED RIGHT HEIGHT™ TOILET

VITREOUS CHINA

❑ 3101.016 Elongated Right Height™ Bowl ❑ 4272.014 Tank

Nominal Dimensions: 772 x 492 x 872mm (30-3/8" x 19-3/8" x 34-5/16")

Fixture only, seat and supply by others

Compliance Certications Meets or Exceeds the Following Specications:

• ASME A112.19.2M for Vitreous China Fixtures includes Flush Performance, Ball Pass Diameter, Trap Seal Depth and all Dimensions

• Los Angeles Department of Water and Power Supplementary Purchase Specication for Non-Adjustability - July, 2003 revision

To Be Specied:

❏ Color: ❏ White ❏ Bone ❏ Silver ❏ Linen ❏ Black ❏ Seat: (please specify color) ❏ Champion® Slow Close Elongated #5325.010 ❏ Rise & Shine Elongated #5324.019

❏ EverClean® Elongated Seat with Slow Close

❏ Supply with stop:

Snap-Off Hinges #5321.110

NOTES:

THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET. SUPPLY NOT INCLUDED WITH FIX TURE AND MUST BE ORDERED SEPARATELY.

DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to c hange or cancellation. No responsibility is assumed for use of superseded or voided pages.

K18

Revised 2/08