American Standard 3099.016, 4098.700, 3099.203 User Manual
CADET™ ELONGATED
12
(305 mm)
31
(787 mm)
C/L OF OUT LET
3-1/ 4
(83m m)
FINI SHED W ALL
225m m
(8-7 /8)
3/4 ± 1/4
(19m m ± 6m m)
14
(356 mm)
18-1 /2
(470 mm)
C/L OF SEA T POST HOLES
5-1/ 2 (140 mm CEN TERS)
13
(330 mm)
5-3/4
(146mm)
5/8
(16m m)
FINI SHED
FLOO R
29
(737 mm)
9-3/ 4
(248 mm)
6
(152 mm)
19-1 /2
(495 mm)
8
(203 mm)
SUPP LY
AS
REQ' D
15
(381 mm)
*
*
PRESSURE-ASSISTED TOILET
❏ 2333.100
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• Elongated bowl
• Pressure-assisted siphon jet ush action
• Fully-glazed 2" ballpass trapway
• 10" x 12" water surface area
• Side-mounted chrome trip lever
• Close-coupled ushometer tank*
• Speed Connect® tank/bowl coupling system
• 2 bolt caps
• 100% factory ush tested
❏ 3099.016 Bowl with two bolt caps
❏ 4098.100 Tank complete with
coupling components
Nominal Dimensions:
787 x 495 x 737mm
(31" x 19-1/2" x 29")
CADET™ ELONGATED
PRESSURE-ASSISTED TOILET
VITREOUS CHINA
Fixture only, seat and supply by others
Recommended working pressure range
20 psi - 80 psi
Alternate Congurations Available:
❏ 3099.203 Elongated bowl only with slotted
rim for bedpan holding
❏ 4098.700 Tank and tank cover only with tank
cover locking device
❏ 4098.800 Tank and tank cover only with right
hand trip lever
❏ 4098.900 Tank complete with right hand trip
lever and tank cover locking device
Compliance Certications Meets or Exceeds the Following Specications:
• ASME A112.19.2 for Vitreous China Fixtures
To Be Specied:
❏ Color: ❏ White ❏ Bone ❏ Linen
❏ Silver ❏ Fawn Beige ❏ Black
❏ Seat: American Standard #5324.019 “Rise and
Shine" (with easy to clean lift-off hinge system)
solid plastic closed front seat with cover.
❏ Seat: American Standard #5311.012 “Laurel"
molded closed front seat with cover.
❏ Alternate Seat:
❏ Supply with Stop:
NOTES:
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
*
SUPPLY NOT INCLUDED WITH FIX TURE AND MUST BE ORDERED
SEPARATELY.
FOR ADDITIONAL INFORMATION REFER TO INSTALLATION
INSTRUCTIONS SUPPLIED.
IMPORTANT: Dimensions of xtures are nominal and may vary within
the range of tolerances established by ANSI Standard A112.19.2. These
measurements are subject to change or cancellation. No responsibilit y is
assumed for use of superseded or voided pages.
* Flushmate III tank system by Flushmate® Div. of Sloan Valve Co
© 2008 AS America Inc.
M46
Revised 2/08
Loading...