American Standard 2795.204, 3053.120, 4000.204 User Manual
STUDIO® CONCEALED TRAPWAY DUAL FLUSH
RIGHT HEIGHT® ROUND FRONT TOILET WITH SEAT
STUDIO® CONCEALED TRAPWAY DUAL FLUSH
RIGHT HEIGHT® ROUND FRONT TOILET WITH SEAT
❑ 2795.204 Right Height
• LXP (Luxury Performance) Toilet in 020 White
• Combination dual ush bowl and tank, with seat
• 12" (305mm) rough-in
• Siphon action jetted bowl with smooth-sided,
concealed trapway
• High efficiency, low consumption Full Flush
1.6gpf/6.0Lpf Conserving Flush 1.1 gpf/4.1Lpf,
utilizes 21% less water
• Meets EPA WaterSense® Criteria
• EverClean® Surface
• PowerWash® rim scrubs bowl with each ush
• 16-1/2" (419mm) rim height
• Fully-glazed 2-1/8" trapway
• Oversized 3" ush valve
• Generous 9" x 8" water surface area
• Includes Duroplast slow close seat and cover
with concealed seat ring and easy lift-off
feature for simple removal and reattachment
for cleaning
• Chrome-plated top mounted push button actuator
• 2 color matched bolt hole covers
• 5 year warranty on entire toilet
• Design coordinates with Studio® and
Boulevard® lavatories
®
Round Front Bowl
VITREOUS CHINA
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
❑ 3053.120 Right Height
®
Round Front bowl
Nominal Dimensions:
718 x 400 x 780mm (28-1/4" x 15-3/4" x 30-3/4")
Fixture only, seat and supply by others
❑ 4000.204 Tank, 1.1/1.6 gpf Dual Flush 12" rough-in
complete with coupling components and tank trim
❑ 5121.110 / 5121.210 Round Front molded seat
Compliance Certications Meets or Exceeds the Following Specications:
• ASME A112.19.2-2008/CSA B45.1-08 for Vitreous
China Fixtures
© 2015 AS America Inc.
K143
Certified by
IAPMO R&T
Rev. 2 /15
STUDIO® CONCEALED TRAPWAY DUAL FLUSH
FINISHED
RIGHT HEIGHT® ROUND FRONT TOILET WITH SEAT
VITREOUS CHINA
WALL
8-3/4"
(221mm)
1-1/8"
(29mm)
2-5/8"
(67mm)
3-1/8"
(81mm)
4-1/2"
(114mm)
IMPORTANT: Wa ter supply on the wall is required at 2-1/4" or 8" from centerline of the toilet (see rough-in).
First suggested position is hidden behind the toilet. The geometry of the toilet gives space for this installation.
The second suggested position is next to the toilet. Between these two positions, the space for the supply
between wall and toilet is limited to 4-1/2". In this case, check your supply and hose dimensions.
(191mm)
12"
(305mm)
7-1/2"
28-1/4"
(717mm)
C/L OF SEAT POST
HOLES 5-1/2"
(140mm) CENTERS
16-1/2"
(419mm)
12-7/8"
(328mm)
16-1/2"
(419mm)
FINISHED
FLOOR
SUPPLY
AS
REQUIRED
(position 1
or
position 2)
5-1/2"
(140mm)
8"
(204mm)
12-3/16"
(309mm)
15-3/4"
(399mm)
14"
(356mm)
2-1/4"
(57mm)
6"
(152mm)
30-7/8"
(784mm)
BACK VIEW
(for reference)
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
*
IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
K144
© 2015 AS America Inc.
Rev. 2 /15
Loading...