American Standard 3052.509 User Manual

WALK-IN BATH 3052.509 VALUE SERIES

The American Standard 30" x 52" Gelcoat walk-in bath provides a similar bathing experience to larger models but ﬁts in smaller spaces and uses less water. The included tub extender allows this tub to retroﬁt in the same space as a standard bathtub. The full sized, contoured door with a low door threshold allows ease of entry and exit.

Fully equipped, the 509 Value Series offers all the latest in safety and comfort features bundled together at one low cost and backed by a lifetime warranty on the door seal, a 10 year warranty on the tub shell and a 5 year warranty on all other components.

Whirlpool Massage

A soothing and invigorating water jet massage system, the Whirlpool massage features an in-line heater and Legs-Only massage. Customize back and leg muscle therapies with 8 dierent water jets. The Whirlpool Spa is combined with all of the features of the Soaker Tub providing an enhanced therapeutic bathing experience.

Air Spa Massage

Experience a soft and caressing all-over body massage powered by a single speed heated blower that releases thousands of air bubbles rising throughout the water from 21 dierent air jets. The automatic purge cycle helps keep the system running ecient and clean. The Air Spa is combined with all of the features of the Soaker Tub providing an enhanced therapeutic bathing experience.

Combination System

Combines all of the features of the Soaker Tub, the Air Spa and the Whirlpool Massage Systems for the ultimate therapeutic bathing experience.

Quick Drain® System

Spend less time waiting with this patented innovation, that requires no additional plumbing, once activated it rapidly pumps the water out from within the tub–making it safe to open the door and exit the tub. Included in all systems.

3052.509 VALUE SERIES 30" X 52" WALK-IN BATH

3052.509.SXX Soaking Tub

• Tub Extender Kit to ﬁll 60" space

• Available in White or Linen and in Left Hand or Right Hand Door/Drain Conﬁguration

• Watertight door system with a lifetime warranty on the door seal

• Built-in chair height seat

• Color matched trim and cable driven waste and overﬂow

• Built-in safety bar and textured tub ﬂoor

• Patented Quick Drain® fast water removal system

• Premium tub faucet and handheld showering wand

3052.509.WXX Whirlpool Massage System

Combines all of the features of the Soaking Tub, plus:

• 8 massage jets with variable ﬂow

• Legs-only massage

• Whirlpool in-line heater

3052.509.AXX Air Spa System

Combines all of the features of the Soaking Tub, plus:

• 21 seat and ﬂoor air injectors

• Single speed heated blower

• Automatic purge cycle

3052.509.CXX Combination System

Combines all of the features of the Soaker Tub, the Whirlpool Massage and the Air Spa Systems for the ultimate therapeutic bathing experience.

GENERAL SPECIFICATIONS FOR 3052.509.XXX

WALK-IN BATHTUB

INSTALLED SIZE __________ 52 x 30 x 42 In. (1321 x 762 x 1067mm) WEIGHT ___________________________________ 138 Lbs. (62 Kg.) WEIGHT w/WATER ________________________ 904 Lbs. (410 Kg.) OPERATING GALLON _________________________ 60 Gal. (227 L.) FLOOR LOADING ______________ 85 Lbs./Sq. Ft. (408 Kgs/Sq. m.) (PROJECTED AREA) CUBE (FT3) __________________________________________ 37.9

To Be Speciﬁed - Required:

 Drain Conﬁguration: Left (L) or Right (R)  Color: White (W) or Linen (L)

Options:

Products with the Arthritis Foundation’s Ease of Use℠ Commendation are tested and proven to make daily tasks easier.

 Handshower Glide Bar: 9HSB  24 inch Grab Bar: 9GB-24  Neck Rest: 9NR

Learn more at arthritis.org/easeofuse.

Notes: The whirlpool heater is designed to maintain water temperature during operation. It will not heat cold water to desired bathing temperature. Tub is supported by the frame and ﬁve integrated adjustable feet, no additional support required. Refer to installation instructions supplied with tub for additional information. Provide suitable reinforcement to sub ﬂoor for all supports.

Our products are in compliance with the following codes: Uniform Plumbing Code UPC®; National Plumbing Code of Canada; International Plumbing Code IPC®

Our products conform to the following standards: ASME A112.19.7, ASME A112.19.15; CSA B45, CSA B45.5; CSA C22.2 No. 218.2; UL-1795; ANSI Z124.1.2 Our products are listed with: c ETL us IMPORTANT: Dimensions of ﬁxtures are nominal, may vary and are subject to change or cancellation. No responsibility is assumed for use of

superseded or voided leaﬂet.