American Standard 2908.178, 2908.020 User Manual

REMINISCENCE™ SOAKING BATH TUB

❏ 2908.020 with White Textured Exterior ❏ 2908.178 with Black Textured Exterior

• Acrylic with DuraBond™ construction

• Vintage “slipper tub" design

• Generous back support with raised headrest

• Molded arm rests

• Sculptured rim designed to match chinaware xtures

• End drain outlet

• Textured tub bottom pattern

• Integral sump support and foot mounting frame

• Two distinctive foot design options

Nominal Dimensions: 1832 x 953 x 692mm (72-1/8" x 37-1/2" x 27-1/4")

REMINISCENCE™

SOAKING BATH TUB

HIGH GLOSS

Compliance Certications Meets or Exceeds the Following Specications:

• ANSI Z124.1 for Plastic Bathtubs

• ASTM E162 for Flammability

• NFPA 258 for Smoke Density

SEE REVERSE FOR PRODUCT DIMENSIONS AND SPECIFICATIONS

To Be Specied - Required:

❏ Color: (specify color) ❏ Reminiscence Feet: 9110.039 (specify nish) ❏ Reminiscence Ball and Claw Feet: 9111.039

(specify nish) ❏ Reminiscence Bath Filler with Personal Shower:

9112.017 (specify nish) ❏ Reminiscence Bathtub Supplies: 9114.012 (specify nish) ❏ Reminiscence Drain and Stopper: 1591.170 (specify nish)

Shown with Reminiscence Foot No. 9111.039,

Filler No. 9112.017, Supplies No. 9114.012, and

Drain No. 1591.170 (not included)

Reminiscence

Ball and Claw Foot

No. 9111.039

Reminiscence Foot

No. 9110.039

For color/nish availability and other faucet choices, please see the Product Selector and Pricing Guide.

H29

Revised 7/02

REMINISCENCE™

953 mm

(37 -1/ 2)

724 mm

(28 -1/ 2)

114 mm (4- 1/2 )

140 mm

(5- 1/2)

127 mm

(5)

89m m

(3- 1/2)

TYP .

343 mm

(13 -1/2)

57m m

(2- 1/4)

C/L OF 1/ 2 NPT

SUP PLIES

C/L OF

DRA IN

FIN ISHED WALL

FIN ISHED

FLO OR

REM INISCE NCE

FOO T

1-3 /8 O.D .

TAI LPIECE

C/L OF

OVE RFLOW

38m m

(1- 1.2)

REM INISCE NCE BAL L & CLA W FOOT

183 2mm

(72 -1/8)

464 mm

(18 -1/4)

REF .

870 mm

(34 -1/4)

REF .

692 mm

(27 -1/4)

584 mm

(23 )

OUTLINE OF

SKID RESISTANT

SURFACE

C/L

368 mm

(14 -1/2)

203 mm

(8)

508 mm (20 )

699 mm (27 -1/2)

108 mm

(4- 1/4)

114 mm

(4- 1/2)

324 mm

(12 -3/4)

FIN ISHED WALL

1/2 N.P.T . INL ETS

WAL L FLAN GES

W/S CREWS

PRO VIDE C ROSS

BRA CING I N WAL L

FOR ANCHO RS

72-1 /8 x 3 7-1/2 x 2 7- 1/ 4 In.

(1832m m x 95 3 mm x 69 2m m)

130 Lb s. ( 59 Kg.)

413 Lb s. ( 18 6 Kg.)

34 Gal . (1 29 L)

18 x 4 2 In . (457mm x 10 67 mm )

67 x 3 1 In . (1702 x 7 87 mm )

14 In. ( 35 6 mm)

22 LBS ./ Sq . Ft. (10 7 Kg s/ Sq . m. )

23.8

48.3

GENERA L SPE CIFICATIONS FOR 2908 B ATHIN G POOL

INSTAL LE D SI ZE

WEIGHT WEIGHT w /W AT ER GAL TO O VE RF LOW BATHIN G WE LL AT SUM P BATHIN G WE LL AT RIM WATER DE PT H TO OVER FL OW FLOOR LO AD IN G (PROJE CT ED A REA) PTS. CUBE ( FT3)

SOAKING BATH TUB

HIGH GLOSS

NOTES:

REFER TO FITTING INSTALLATION INSTRUCTIONS FOR SUPPLY DIMENSION.

● TRANSITION SEAL PROVIDED FOR 1 1/2" O.D. WASTE CONNECTION.

▼ LOCATION OF SUPPLIES FROM FINISHED WALL 87MM (3-1/2") MINIMUM - 340MM (13 3/8) MAX.

2908.020 WITH WHITE TEXTURED EXTERIOR.

2908.178 WITH BLACK TEXTURED EXTERIOR.

REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH BATH FOR ADDITIONAL INFORMATION.

FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

PROVIDE SUITABLE REINFORCEMENT FOR ALL FLOOR AND WALL SUPPORTS.

IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standards Z124.1. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaet.

H30

Revised 7/02