American Standard 2902.028WC User Manual
SAVONA CORNER™ WHIRLPOOL
❏ 2902.028WC Whirlpool featuring System II
• Acrylic with berglass reinforcement
• EverClean® System
• Pre-leveled tub bottom
• Molded-in arm rests
• Molded-in seat
• Faucet deck/accessory area
• 2.1 HP two speed, self-draining pump/motor
with pulse feature
• Factory installed power cord with plug
• Eight multi-directional and ow-adjustable
jets including:
- Three Ideal-ow jets
- Three body massage jets
- Two recessed back-rest jets
• Deck-mounted, electronic control with 20
minute built-in timed safety shut off and
Chrome bezel
• Three silent air volume controls
• Quick Connect Safe-T-Heater
connection system
• Factory installed and tested whirlpool system
SAVONA CORNER™
WHIRLPOOL
HIGH GLOSS
Nominal Dimensions:
1480 x 1480 x 572mm
(58-1/4" x 58-1/4" x 22-1/2"
Compliance Certications Meets or Exceeds the Following Specications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
American Standard whirlpools and air baths with
EverClean® incorporate a patented silver-ion
additive right into the circulation piping to protect
the pipes from mold, mildew, algae and fungus that
could cause deterioration or staining of the pipes.
SEE REVERSE FOR PRODUCT DIMENSIONS
AND SPECIFICATIONS
To Be Specied - Required:
❏ Color: (specify color)
❏ Bath Faucet: (specify nish)
❏ Rotary Drain: 1583.470 (specify nish)
To Be Specied - Optional:
❏ Safe-T-Heater*: 9075.120
❏ System II Control Bezel: 9861.100 (specify nish)
For color/nish availability and other faucet choices, please
see the Product Selector and Pricing Guide.
* NOTE: the Safe-T-Heater is designed to maintain water
temperature during operation. It will not heat cold water to
desired bathing temperature.
© 2008 AS America Inc.
H33
Revised 2/08
SAVONA CORNER™
RECOMMENDED
FITTING LOCATION
64 X 330mm (2-1/2 X 13)
ON/ OFF
SWI TCH
ROUGH
FLOOR
C/L OF
OVERFLOW
1-1/2 O.D. TAILPIECE
INTEGRAL
FEET
LEVELING
STRINGER
NOT FOR
SUPPORT
89 mm
(3-1/2)
44 mm
(1-3/4)
1-1/2 N.P.T.M.
THREADS
102mm
(4)
102mm
(4)
521 mm
(20-1/2)
572 mm
(22-1/2)
51 mm
(2)
1
588 mm
(62 -1/ 2)
149 2mm
(58 -3/ 4)
176 5 m m
(69 -1/ 2)
106 7 m m
(42 )
CUTOUT
IN FLOOR
FOR
DRAIN
PUMP
209 6mm
(82 -1/ 2)
914mm
(36)
203mm
(8)
1-1/2 O.D. DRAIN
OUTLET
104 8mm
(41 -1/ 4)
1067 mm
(42)
OUTLINE OF
CUTOUT
PROV IDE A CCESS
TO P UMP F OR
SERV ICING ON AL L
INST ALLAT IONS
C/L
SAFE-T-HEATER
REMOVABLE BLA NK
GENERAL SPECI FICATI ONS FOR 2902 WHIRLPO OL
82 -1 /2 x 69-1 /2 x 2 2-1/2 I n. (2 096 x 1 76 5 x 572 mm )
1 44 Lb s. ( 65 Kg.)
803 L bs . (361 Kg .)
79 Ga l. ( 299 L )
73 Ga l. ( 277 L )
38 x 30 I n. (9 65 x 7 62mm)
58 x 55 I n. (1 47 3 x 1397m m)
15- 3/ 4 In . (40 0m m)
33 Lb s. /S q.Ft. ( 16 5 Kgs./ Sq .m )
41. 7
76. 8
INS TA LL ED SIZE
WEI GH T
WEI GH T w/ WATER
GAL . TO O VERFL OW
WHI RL PO OL MIN. O PE RA TING VO L.
BAT HI NG W ELL A T SU MP
BAT HI NG W ELL A T RI M
WAT ER D EP TH TO O VE RF LOW
FLO OR L OA DING
(PR OJ EC TE D ARE A)
PTS .
CUBE (F T3)
WHIRLPOOL ELECTRICAL SPECIFICATIONS
2.1 H P, 1 5.6 A MP S, 1 20V.SYS TE M II PUMP
WHIRLPOOL
HIGH GLOSS
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND OR PENINSULA T YPE INSTALLATION. SUMP
OF BATH IS SUPPORTED BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED. ENCLOSING MATERIALS BY OTHERS.
OPTIONAL TILING BE AD KIT AVAILABLE.
■ REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.
▲ CUTOUT TEMPL ATE PROVIDED IN SHIPPING BOX. MAY BE REQUESTED SEPARATELY.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
© 2008 AS America Inc.
● IF INSTALLING A DECK-MOUNTED FITTING, BEFORE DRILLING ANY HOLES: CHECK FOR INTERFERENCE WITH CIRCULATING
SYSTEM PIPING AND DRAIN OVERFLOW. MOUNTING HOLES DRILLED BY INSTALLER.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
ON SYSTEM I I: CONTROL MODULE TO BE MOUNTED BEHIND ACCESS PANEL, A MINIMUM OF (152mm) 6 ABOVE ROUGH FLOOR.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1 / CSA
Certied. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaet.
H34
Revised 2/08
Loading...