American Standard 2470.028WC, 2470.002, 2470.028W, 2470.018W, 2470.128W User Manual

...

STRATFORD™ 5-1/2'

WHIRLPOOL AND BATHING POOL

AMERICAST® BRAND ENGINEERED MATERIAL

STRATFORD 5-1/2' WHIRLPOOL AND BATHING POOL

❏ 2470.028W Whirlpool Featuring System I:

• Americast

brand engineered material

• Acid-resistant porcelain finish

• Integral lumbar support with beveled headrest

• Full slip-resistant coverage

• End drain outlet

• 1.5 HP single speed, self-draining pump/motor

• Factory installed power cord and plug

• Six multi-directional and flow-adjustable jets

• Deck-mounted air switch On/Off

• Two silent air volume controls

• Quick Connect Safe-T-Heater connection system

• Factory installed and tested whirlpool system

❏ 2470.128W Whirlpool Massage featuring

System I with Grab Bar Drilling

• Same as 2470.028W except with grab bar drilling (grab bar must be ordered seperately)

❏ 2470.028WC StayClean™ Whirlpool

Massage featuring System I

• Same as 2470.018W except with the StayClean™ whirlpool system featuring Antimicrobial AlphaSan®

❏ 2470.128WC StayClean™ Whirlpool

Massage featuring System I

• Same as 2470.128W except with the StayClean™ whirlpool system featuring Antimicrobial AlphaSan® and grab bar drilling (grab bar must be ordered seperately)

❏ 2470.002 Bathing Pool ❏ 2470.102 Bathing Pool with Grab Bar Drilling

• Same as 2470.002 except with grab bar drilling (grab bar must be ordered seperately

Nominal Dimensions: 66" x 32" x 20" (1676 x 813 x 508mm) Bathing Well Dimensions: 60" x 27" x 18" (1524 x 686 x 457mm)

Americast

brand engineered material is a composition of porcelain bonded to enameling grade metal, bonded to a patented structural composite.

BV-36

Rev. 4/05

NOTE: Roughing-in dimensions shown on reverse side of page.

Compliance Certifications Meets or Exceeds the Following Specifications:

• Underwriters Laboratories - Hydromassage Bathtubs UL 1795

• ASME A112.19.7M for Whirlpool Appliances

• ASME A112.19.4M for Americast Fixtures

• ASTM F-462 for Slip-resistant Bathing Facilities

• ASTM E162 for Flammability

• NFPA 258 for Smoke Density

To Be Specified - Required:

❏ Color: ❏ Bath Filler: (specify finish) ❏ Bath Drain: 1583.470 (specify finish)

To Be Specified - Optional:

❏ Safe-T-Heater*: 9075.120 ❏ Jet Trim Ring Kit: 9860.200-one per kit

(specify color) for Body Massage Jets only

❏ Universal Tile Bead Kit: 751755-100

For color/finish availability and other faucet choices, please see the Product Selector and Pricing Guide.

* NOTE: the Safe-T-Heater is designed to maintain water temperature during operation. It will not heat cold water to desired bathing temperature.

STRATFORD™ 5-1/2'

WHIRLPOOL AND BATHING POOL

AMERICAST® BRAND ENGINEERED MATERIAL

1676mm

(66)

813mm

(32)

235mm

(9-1/4)

406mm

(16)

OUTLINE OF 1638 X 775mm (64-1/2 X 30-1/2) CUTOUT

19mm (3/4)

C/L OF

SUPPLIES

FINISHED WALL

32mm (1-1/4)

C/L OF DRAIN OUTLET

229 X 305mm (9 X 12) FLOOR CUTOUT

508mm

(20)

476mm

(18-3/4)

MIN.

32mm (1-1/4)

1-1/2 N.P.T. THREADS

1-1/2 O.D. TAILPIECE

70mm

(2-3/4)

117mm (4-5/8)

SUPPORT STRINGER

305mm

(12)

102mm (4)

1651-1982mm

(65-78)

OPTIONAL

70mm

(2-3/4)

FINISHED WALL

C/L OF

SHOWER ARM

C/L OF SPOUT

C/L OF VALVES

C/L OF OVERFLOW

SEE FITTING SPECS

FOR DIMENSION

203mm

(8)

1676mm

(66)

813mm

(32)

PROVIDE ACCESS

TO PUMP FOR

SERVICING

ON ALL

INSTALLATIONS

235mm

(9-1/4)

406mm

(16)

OUTLINE OF 1638 X 775mm (64-1/2 X 30-1/2) CUTOUT

19mm (3/4)

C/L OF 1/2 SUPPLIES

AS REQUIRED

FINISHED WALL

PUMP

ON/OFF

SWITCH

32mm (1-1/4)

C/L OF DRAIN OUTLET

229 X 305mm (9 X 12) FLOOR CUTOUT

508mm

(20)

476mm

(18-3/4)

MIN.

32mm (1-1/4)

1-1/2 N.P.T. THREADS

1-1/2 O.D. TAILPIECE

70mm

(2-3/4)

117mm (4-5/8)

SUPPORT STRINGER

324mm

(12-3/4)

102mm (4)

711mm

(28)

32mm (1-1/4) DIA. HOLE 1/2 N.P.T. SHOWER

44mm (1-3/4) DIA. HOLES FOR CONTROL VALVES

32mm (1-1/4) DIA. HOLE FOR 1/2 N.P.T. SPOUT

203mm (8)

1651-1982mm

(65-78)

OPTIONAL

1/2 SUPPLIES

AS REQ'D

CURTAIN ROD

1930mm (76)

OPTIONAL TO FLOOR

70mm

(2-3/4)

FINISHED WALL

C/L OF OVERFLOW

76mm

(3)

SAFE-T-HEATER

REMOVABLE BLANK

NOTES:

BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE INSTALLATION. SUPPORT OF BATH BY RIM, SUMP SUPPORT NOT REQUIRED. SUPPORT AND ENCLOSING MATERIAL BY OTHERS REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL/BATH FOR ADDITIONAL INFORMATION. OPTIONAL 3-WALL TILING BEAD KIT AVAILABLE AND MUST BE ORDERED SEPARATELY. FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY. SHOWN WITH POP-UP C.D. & O. PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS. CONCEALED PIPING NOT INCLUDED.

GENERAL SPECIFICATIONS FOR 2470 WHIRLPOOL

WHIRLPOOL ELECTRICAL SPECIFICATIONS

SYSTEM I PUMP 1.6 HP, 9.7 AMPS,120V.

66 x 32 x 20 In. (1676 x 813 x 508mm)

201 Lbs. (90 Kg.)

701 Lbs. (315 Kg.)

60 Gal. (227 L)

40 Gal. (152 L) 42 x 19 In. (1067 x 483mm) 60 x 27 In. (1524 x 686mm)

14 In. (356mm)

55 Lbs./Sq.Ft. (223 Kgs./Sq.m)

13.9

33.7

INSTALLED SIZE WEIGHT WEIGHT w/WATER GAL. TO OVERFLOW WHIRLPOOL MIN. OPERATING VOL. BATHING WELL AT SUMP BATHING WELL AT RIM WATER DEPTH TO OVERFLOW FLOOR LOADING (PROJECTED AREA) PTS. CUBE (FT

)

GENERAL SPECIFICATIONS FOR 2470 BATHING POOL

66 x 32 x 20 In. (1676 x 813 x 508mm)

174 Lbs. (78 Kg.)

674 Lbs. (303 Kg.)

60 Gal. (227 L)

42 x 19 In. (1067 x 483mm) 60 x 27 In. (1524 x 686mm)

14 In. (356mm)

48 Lbs./Sq.Ft. (206 Kgs./Sq.m)

13.9

33.7

INSTALLED SIZE WEIGHT WEIGHT w/WATER GAL. TO OVERFLOW BATHING WELL AT SUMP BATHING WELL AT RIM WATER DEPTH TO OVERFLOW FLOOR LOADING (PROJECTED AREA) PTS. CUBE (FT3)

Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.4 These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaflet.

IMPORTANT: