American Standard 2403.513, 2403.128 User Manual
COMPACT CADET® 3 FloWise® ELONGATED
724m m
(28- 1/2)
159m m
(6-1 /4)
16 ± 6mm
(5/8 ± 1/4 )
419m m
(16- 1/2)
292m m
(11- 1/2)
267m m
(10- 1/2)
724m m
(28- 1/2)
381 mm
(15)
394m m
(15- 1/2)
79mm
(3-1 /8)
FINI SHED W ALL
422m m
(16- 5/8)
305m m
(12)
C/L OF OUT LET
241m m
(9-1 /2)
140m m
(5-1 /2)
SUPP LY
AS
REQ' D
*
FINI SHED
FLOO R
C/L OF SEA T POST
HOLE S 140m m
(5-1 /2) CE NTERS
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND
ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE
BUILDING FACILITIES-CHECK LOCAL CODES.
Certified by
IAPMO R&T
RIGHT HEIGHT™ ONE-PIECE TOILET WITH SEAT
❑ 2403.128
• Vitreous china
• Meets denition for HET (High Efciency Toilet)
• High Efciency (4.8 Lpf/1.28 gpf)
• Space saving compact design - Elongated
Right Height bowl ts in the same space as
a round front toilet
• EverClean® surface inhibits the growth of
stain- and odor-causing bacteria, mold,
and mildew on the surface
• Featuring the Cadet® 3 Flushing System
• One-piece design
• Elongated siphon action jetted bowl with
2-1/8" trapway
• Internal trapway area fully glazed
• Rim height at 419mm (16-1/2") for accessible
application
• Includes color-matched and design-matched
solid plastic toilet seat and cover with slowclose hinges and EverClean® surface.
Seat features unique sanitary seat lift tab
• Oversized 3" Flush Valve with Chemical
Resistant Flapper
• 10" x 8" water surface area
• 2 bolt caps
• Chrome Trip Lever
• 100% factory ush tested
• 5 year warranty
COMPACT CADET® 3 FloWise®
ELONGATED ONE-PIECE TOILET
VITREOUS CHINA
❑
2403.513 Same as above, except with
Aquagurad liner in tank
Nominal Dimensions:
724 x 394 x 724mm
(28-1/2" x 15-1/2" x 28-1/2")
Fixture only, supply by others
Compliance Certications Meets or Exceeds the Following Specications:
• ASME A112.19.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
• Los Angeles Department of Water and Power
Supplementary Purchase Specication for
Non-Adjustability
• Certied in EPA WaterSense HET program
© 2008 AS America Inc.
To Be Specied:
❑ Color:
❏ White ❏ Bone ❏ Linen
❏ Silver ❏ Black
❑ Supply with Stop:
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF
305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIX TURE AND MUST BE ORDERED
SEPARATELY.
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
*
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerance established by ANSI Standard A112.19.2
These measurements are subject to c hange or cancellation. No responsibility
is assumed for use of superseded or voided pages.
K15
Revised 2/08
Loading...