American Standard 2385.009, 2385.010, 2385.008, 2385.407, 2385.011 User Manual

...

RELIANT+

SINGLE CONTROL LAVATORY FAUCET

EXTRA LONG METAL LEVER HANDLE

MODEL NUMBER:

2385.007 Lavatory Faucet

3/8" O.D. copper inlets. Metal pop-up drain.

2385.407 Lavatory Faucet

Metal pop-up drain. 1/2" male threaded connectors and nuts.

2385.008 Lavatory Faucet

Less drain. 3/8" O.D. copper inlets. Less pop-up hole.

2385.009 Lavatory Faucet

Grid drain. 3/8" O.D. copper inlets. Less pop-up hole. Vandal Resistant 0.5 gpm Spray.

2385.010 Lavatory Faucet

Less pop-up drain. 3/8" O.D. copper inlets. With pop-up hole and rod.

2385.007 Shown.

159mm

(6-1/4)

4˚

171mm

(6-3/4)

56mm

(2-3/16)

56mm 2-3/16

114mm

(4-1/2)

GENERAL DESCRIPTION:

All metal body with extra long Metal Lever Handle. Washerless 47mm ceramic disc valve cartridge. Equipped with a hot limit safety stop. Choice of 3/8" copper supplies or 3/8" O.D. copper with 1/2" male connectors and nuts. Metal lever handle with large "comfort zone". Fitting mounts on 4" centers. 2.2 gpm/8.3L/min. maximum flow rate.

2385.011 Lavatory Faucet

Less drain. 3/8" O.D. copper inlets. Less pop-up hole. Vandal Resistant 0.5 gpm Spray.

154mm

(6-1/16)

49mm

(1-15/16)

98mm

(3-7/8) 114mm

(4-1/2)

32mm (1-1/4)DIA. MOUNTING HOLE

102mm

(4)

PRODUCT FEATURES:

All Copper Waterway: Highest quality, faucet material for

durability & long life.

Ceramic Disc Valve Cartridge: Assures smooth, precise

valve control and a lifetime of drip-free, maintenance-free performance.

Wide Comfort Zone: Gives more sensitive temperature

control.

Adjustable Hot Limit Safety Stop: Limits the amount of

hot water allowed to mix with cold. Reduces the risk of accidental scalding.

Low Lead: Meets NSF Standard 61/Section 9 & Prop 65

lead requirements.

SUGGESTED SPECIFICATION

Single control lavatory fitting shall feature an all metal body with extra long metal lever handle. Shall also feature a washerless ceramic disc valve cartridge. Fitting shall be equipped with a hot limit safety stop. Fitting shall be American Standard Model #

2385.___.___.

L71

RELIANT+

SINGLE CONTROL LAVATORY FAUCET

EXTRA LONG METAL LEVER HANDLE

CODES AND STANDARDS

These products meet or exceed the following codes and standards:

ANSI A117.1 ASME A112.18.1 CSA B 125 NSF 61/Section 9

Product Number

2385.007

2385.407

2385.008

2385.009

2385.010

2385.011

Description

Lavatory Faucet. Extra Long Metal Lever Handle. Metal pop-up drain. 3/8" O.D. copper inlets. 2.2gpm/8.3 L/min max. flow rate.

Lavatory Faucet. Extra Long Metal Lever Handle. Metal pop-up drain. 3/8" O.D. copper inlet supplies with 1/2" male threaded connectors and nuts. 2.2gpm/8.3 L/min max. flow rate.

Lavatory Faucet. Extra Long Metal Lever Handle. Less pop-up drain. 3/8" O.D. copper inlets. Less pop-up hole. 2.2gpm/8.3 L/min max. flow rate.

Lavatory Faucet. Extra Long Metal Lever Handle. Grid drain. 3/8" O.D. copper inlets. Less pop-up hole. Vandal Resistant 0.5 gpm/ 1.9 L/min Spray.

Lavatory Faucet. Extra Long Metal Lever Handle. Less pop-up drain. 3/8" O.D. copper inlets. With pop-up hole and rod. 2.2gpm/8.3 L/min max. flow rate.

Lavatory Faucet. Extra Long Metal Lever Handle. Less drain. 3/8" O.D. copper inlets. Less pop-up hole. Vandal Resistant 0.5 gpm/ 1.9 L/min Spray.

FLOW RATE*

3.0

2.5

2.0

1.5

1.0

0.5

GALLONS PER MINUTE

0.0

INLET PRESSURE (PSI)

*Flow rates shown are for mixed hot and cold.

Finish

Polished

Chrome

002

10080604020

Meets the American Disabilities Act Guidelines and ANSI A117.1 Requirements for the physically challenged.

L72