American Standard 2359.010, 3370.016 User Manual

419m m
(16- 1/2)
(30- 3/4)
(10)
(27- 3/4)
C/L OF OUT LET
79mm
(3-1 /8)
FINI SHED W ALL
19mm ± 6mm (3/4 ± 1/4 )
470m m
(18- 1/2)
C/L
C/L OF SEA T POST HOLES 140m m (5-1 /2 CEN TERS)
(12- 1/4)
178mm
(7)
16mm
(5/8 )
FINI SHED FLOO R
(9-1 /4)
(6)
(20)
(8)
SUPP LY
AS
REQ' D
*
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE BUILDING FACILITIES-CHECK LOCAL CODES.
COLONY™ RIGHT HEIGHT™ ELONGATED 10" ROUGH-IN TOILET
2359.010
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• 16-1/2" rim height for accessible applications
• 10" roughing-in
• Elongated siphon action jetted bowl
• Fully glazed 2" trapway
• American Standard Aquameter™ Water Control
• Color-matched trip lever
• Sanitary bar on bowl
• 2 bolt caps
• 100% factory ush tested
3370.016 Bowl ❑ 4310.016 Tank
Nominal Dimensions: 705 x 508 x 781mm (27-3/4" x 20" x 30-3/4")
COLONY™ RIGHT HEIGHT™
ELONGATED 10" ROUGH-IN TOILET
VITREOUS CHINA
Fixture only, seat and supply by others
Compliance Certications ­Meets or Exceeds the Following Specications:
• ASME A112.19.2M for Vitreous China Fixtures - includes Flush Performance, Ball Pass Diameter, Trap Seal Depth and all Dimensions
To Be Specied:
Color: White Seat: American Standard #5324.019 “Rise and
Shine” solid plastic closed front seat with cover. Seat: American Standard #5311.012 “Laurel” molded closed front seat with cover.
Alternate Seat: Supply with stop:
NOTES:
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 254MM (10") FROM FINISHED WALL TO C/L OF OUTLET.
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
*
SUPPLY NOT INCLUDED WITH FIX TURE AND MUST BE ORDERED SEPARATELY.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerance established by ANSI Standard A112.19.2 These measurements are subject to c hange or cancellation. No responsibility is assumed for use of superseded or voided pages.
© 2008 AS America Inc.
K91
Revised 2/08
Loading...