American Standard 2282.010 User Manual
ROUND FRONT FLUSH VALVE TOILET
102 mm
(4)
38 mm (1- 1/2)
603 mm
(23 -3/4)
FIN ISHED WALL
C/L SEAT POST HOLES
140 mm ( 5-1/2) CENTE RS
381 mm
(15 )
176 mm
(6- 15/16)
254 mm
(10 )
257 mm
(10 -1/8)
C/L OUTLE T
13 mm
(1/ 2)
FIN ISHED
FLO OR
318 mm
(12 -1/2)
216 mm
(8- 1/2)
C/L
254 mm
(10 )
546 mm
(21 -1/2)
121 mm
(4- 3/4)
1-1 /2"
SPU D
1" N.P.T. OR C .W.T.
SUP PLY AS REQU IRED
BABY DEVORO™ ROUND FRONT 10" ROUGH
❏ 2282.010
• Round front ush valve toilet
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• Fully glazed 2" ballpass trapway
• 10" x 12" water surface area
• 10" high bowl
• 10" roughing-in
• Siphon ush action
• 2 bolt caps
• 1-1/2" top spud
• 100% factory ush tested
Component parts:
❏ 047007-0070A Inlet spud (furnished with bowl)
❏ 481310-100 Bolt caps with retainers
(furnished with bowl)
BABY DEVORO™
VITREOUS CHINA
Nominal Dimensions:
603 x 318 x 254mm
(23-3/4" x 12-1/2" x 10")
Recommended working pressure – between
25 psi at valve when ushing and 80 psi static
Fixture only, less seat, bolt caps, and ush valve
Compliance Certications Meets or Exceeds the Following Specications:
• ASME A112.19.2 for Vitreous China Fixtures
To Be Specied:
❏ Color: ❏ White ❏ Bone
❏ Seat: Olsonite #126-CC open front seat less cover
❏ Seat: Church #1580C open front seat less cover
❏ Alternate Seat:
❏ Flush Valve
❏ American Standard Selectronic™ #6065.161.002
DC Power (Top Spud)
© 2008 AS America Inc.
NOTES:
TO COMPLY WITH AREA CODE GOVERNING THE HEIGHT OF VACUUM
BREAKER ON FLUSH VALVE, THE PLUMBER MUST VERIFY
DIMENSIONS SHOWN FOR SUPPLY ROUGHING.
FLUSH VALVE NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION
OF 254MM (10") FROM FINISHED WALL TO C/L OF OUTLET.
IMPORTANT: Dimensions of xtures are nominal and may vary within
the range of tolerances established by ANSI Standard A112.19.2. These
measurements are subject to change or cancellation. No responsibilit y is
assumed for use of superseded or voided pages.
M53
Revised 11/08
Loading...