American Standard 0573.000 User Manual
BARRIER FREE
SEBRING™ COUNTERTOP SINK
FINI SHED
WALL
OR
SPLA SH BA CK
178m m
(7)
381m m
(15)
38mm
(1-1 /2)
MIN.
51mm
(2)
MIN.
B
A
C/L
464mm
(18-1/4)
1-1/ 4 O.D .
TAIL PIECE
1-1/ 4 O.D .
WAST E
203m m
(8)
165m m
(6-1 /2)
178m m
(7)
16mm
(5/8 )
COUNTERTOP
(BY OTHERS)
SEALING
COMPOUND
SUPPLIES
AS REQ'D.
305m m
(12)
*
254m m
(10)
*
FINI SHED
FLOO R
787mm
(31)
SUGGESTE D
FITTING
CENTER- SET
SPREAD
A
27mm(1- 1/16)
32mm(1- 1/4)
B
102mm(4 )
203mm(8 )
• Made from vitreous china
• Self-rimming with cutout template supplied
• Center drain outlet
• Front overow
❏ 0573.000 Oval sink without faucet deck
Nominal Dimensions:
464mm x 381mm
(18-1/4" x 15")
Bowl sizes:
400mm (15-3/4") wide
311mm (12-1/4") front to back
140mm (5-1/2") deep
Compliance Certications Meets or Exceeds the Following Specications:
• ASME A112.19.2M for Vitreous China Fixtures
SEBRING™
COUNTERTOP SINK
VITREOUS CHINA
To Be Specied:
❏ Color: ❏ White ❏ Bone ❏ Linen
❏ Silver ❏ Fawn Beige ❏ Black
❏ Faucet*:
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
* See faucet section for additional models available
© 2008 AS America Inc.
NOTES:
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TR AP
*
ARE SUGGESTED.
FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE
TEMPLATE SUPPLIED WITH SINK.
FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
SEALING COMPOUND SUPPLIED BY OTHERS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to c hange or cancellation. No responsibility
is assumed for use of superseded or voided pages.
J35
Revised 2/08
Loading...